Will a 350 bridge associate with a 350 AP?


Will an Aironet 350 bridge [NOT workgroup bridge!] in non-root mode
associate with a 350 AP [dedicated AP, not a bridge in AP mode] such
as the AP352E2C?

Thank you.

.

Relevant Pages

  • Re: recommandations for a 2nd wifi "switch"
    ... act as a "workgroup bridge", although they don't call it that. ... manufactories do not disclose how many MAC addresses they will bridge. ... Does the WET-54G act as real "workgroup bridge" (ie it will bridge ...
    (alt.internet.wireless)
  • Replace Aironet 350 Workgroup
    ... two remote locations connected to the bridge with Aironet 350 Workgroup ... prepurchase support to see if the Aironet 1300 bridge will connect to ... Proposed configuration ...
    (comp.dcom.sys.cisco)
  • Re: Replace Aironet 350 Workgroup
    ... | two remote locations connected to the bridge with Aironet 350 Workgroup ... I think I can tell you how to remove the 8 client limit on the WGB if ...
    (comp.dcom.sys.cisco)
  • Re: recommandations for a 2nd wifi "switch"
    ... A workgroup bridge is effectively a fancy client radio. ... really can't handle too many MAC addresses. ... for my attempt at clearing up the bridge definition mess. ...
    (alt.internet.wireless)
  • Re: recommandations for a 2nd wifi "switch"
    ... Jeff Liebermann hath wroth: ... act as a "workgroup bridge", although they don't call it that. ... manufactories do not disclose how many MAC addresses they will bridge. ...
    (alt.internet.wireless)