Re: PIX 515E 7.2(1) Routing between two subnets on same wire
- From: Ulf Tropp <tropp@xxxxxxxxx>
- Date: Thu, 29 Mar 2007 18:59:11 +0200
Ulf Tropp wrote:
We have two subnets on the inside interface. The 'non native' subnet has
a static route
pointing to the inside interface. Routing to that subnet works when
coming via VPN
(clients on 'inside' subnet) but not from inside. Packet tracing says
that packets are
dropped by the implicit Inside Any->Any drop rule but we have an
explicit Inside Any->Any permit
rule before that.
Update: "Enable traffic between tho hosts connected to the same
interface"
made packets flow until NAT Lookup. "portmap translation creation
failed..."
.
- Follow-Ups:
- References:
- PIX 515E 7.2(1) Routing between two subnets on same wire
- From: Ulf Tropp
- PIX 515E 7.2(1) Routing between two subnets on same wire
- Prev by Date: PIX 515E 7.2(1) Routing between two subnets on same wire
- Next by Date: Cisco aironet ap 340 & snmp
- Previous by thread: PIX 515E 7.2(1) Routing between two subnets on same wire
- Next by thread: Re: PIX 515E 7.2(1) Routing between two subnets on same wire
- Index(es):
Relevant Pages
|
