PIX 515E 7.2(1) Routing between two subnets on same wire

We have two subnets on the inside interface. The 'non native' subnet has
a static route
pointing to the inside interface. Routing to that subnet works when
coming via VPN
(clients on 'inside' subnet) but not from inside. Packet tracing says
that packets are
dropped by the implicit Inside Any->Any drop rule but we have an
explicit Inside Any->Any permit
rule before that.
.

Relevant Pages

  • Routing and RRAS Problem - Pleasehelp
    ... but the problem is the PC's on the subnet 1 cannot access the Internet. ... router that is running a DHCP, The IP of the router is ... enable RRAS, and is running fine, Interface called INTERNET is connected to ...
    (microsoft.public.windows.server.networking)
  • Re: Routing and RRAS Problem - Pleasehelp
    ... Interface List ... but the problem is the PC's on the subnet 1 cannot access the Internet. ... router that is running a DHCP, The IP of the router is ... enable RRAS, and is running fine, Interface called INTERNET is connected to ...
    (microsoft.public.windows.server.networking)
  • Re: Cisco PIX 501: Cant ping global IP-Adress from NATed IP
    ... on the 'static' statement for the server, add the 'dns' keyword. ... The catch is that the two interfaces cannot have the same IP subnet, ... of the external interface. ... then the PIX wouldn't know which interface to send it towards. ...
    (comp.dcom.sys.cisco)
  • Re: MultiHomed Workstation - Which NIC is being used?
    ... Regardless of which interface received ... the same routing rules apply for return traffic. ... >> the subnet mask. ... >> load balancing of multiple NICs and default gateways. ...
    (microsoft.public.win2000.networking)
  • Re: Routing and RRAS Problem - Pleasehelp
    ... Interface 10.1.0.11 (facing internet) ... but the problem is the PC's on the subnet 1 cannot access the Internet. ... I can ping PCs on the subnets from the RRAS server. ...
    (microsoft.public.windows.server.networking)