Thanks for reading. We've got a Catalyst 2948G switch that had an
incorrect default route specified. I added the correct default route
with the set ip route default command. The default route appears but
the incorrect route is still there (see below):
set interface sl0 down
set interface me1 down
set ip route 0.0.0.0/0.0.0.0 172.16.1.1
set ip route 0.0.0.0/0.0.0.0 172.16.0.1
set ip alias default 0.0.0.0
Re: How to set default gw not by route command in linux? ... only have one default route.... Beg your pardon Floyd, but _EVERY_ Linux distribution uses the keyword ... It is incorrect, and it is *not* universally used incorrectly. ... Then his network is not the typical home setup, ... (comp.os.linux.networking)
Re: Control.DrawToBitmap and Restrictions ... using the Control.Bounds property straight up within DrawToBitmap.... Seems that going that route is incorrect. ... Could you post the URL/help topic name where you found the incorrect sample?... I'll then file a bug report if it's really a bug in the documentation. ... (microsoft.public.dotnet.languages.vb)
Remove IP Route from Route T ... We've got a Catalyst 2948G switch that had an ...incorrect default route specified....set interface sl0 down ... (comp.dcom.sys.cisco)
Re: sparking/electrical problem with Peco points ... If one has a number of sidings splaying out, ... a process of selecting all the turnouts one by one to set your route.... The general rule should be to switch everything off and only switch it ... (uk.rec.models.rail)
Re: sparking/electrical problem with Peco points ... If one has a number of sidings splaying out, ... a process of selecting all the turnouts one by one to set your route.... then locos can spring to life ... The general rule should be to switch everything off and only switch it ... (uk.rec.models.rail)
