Re: Roaming on three Cisco Aironet (AIR-AP-1231G)
- From: Aaron Leonard <Aaron@xxxxxxxxx>
- Date: Mon, 26 Feb 2007 10:49:42 -0700
Martin,
If all you want from the 1231s is the same functionality that you had
with the ZyXELs, then just configure them the same way. I.e. use the
same SSID on all 3 APs and same static WEP key.
Aaron
---
~ At the moment I have four ?ZyXEL ZyAIR B-1000? accesspoints.
~ They are configured to use roaming (with no central server radius etc.)
~ and they all have the same SSID. The clients move nicely between them,
~ no problem? But they only support WEP and not WPA.
~
~ Therefore I now have three AP-1231 cisco access-points. But how do I set
~ up roaming (with no central server) like the zyxel?
~ All the information I have found on the Internet describes solutions
~ with a central server?
~ The roaming was really simple on the zyair but I suppose cisco have the
~ same functionality some where?
~
~
~
~ Best Regards
~ Martin
.
- Follow-Ups:
- Re: Roaming on three Cisco Aironet (AIR-AP-1231G)
- From: Martin
- Re: Roaming on three Cisco Aironet (AIR-AP-1231G)
- References:
- Roaming on three Cisco Aironet (AIR-AP-1231G)
- From: Martin
- Roaming on three Cisco Aironet (AIR-AP-1231G)
- Prev by Date: Re: Cisco Wireless APs and Backhauling Question no hardwired option
- Next by Date: One router / 2 WANs / Load balancing and Failover - HOW?
- Previous by thread: Roaming on three Cisco Aironet (AIR-AP-1231G)
- Next by thread: Re: Roaming on three Cisco Aironet (AIR-AP-1231G)
- Index(es):