Re: Internet to a 2611 through a Linksys WRT54G

Do you have a route to the inside (192.168.1.0 255.255.255.0) network
on the Linksys?

James

tony.dixson@xxxxxxxxx wrote:
Hello I am trying to configure a Cisco 2611 router to connect to the
internet using a Linksys WRT54G as a border router. The reason I would
like to keep the linksys router on the outside of the Cisco router is
to prevent wireless clients from accessing my internal network but
allow them access to the internet. When I use the Config posted below
I am able to ping both interfaces on the 2611, and both interfaces on
the Linksys router out to the external interface but I am not able to
get out to the internet. I am some what new to Cisco routers so any
help with the Config would be much appreciated.

The internal network IP is 192.168.x
The network in between the Cisco router and Linksys router is 10.2.3.x
with the internal interface on the Linksys router being 10.2.3.1 and
the external interface on the Cisco router being 10.2.3.5
The internet connection has a DHCP assigned address

Using 896 out of 29688 bytes
!
version 12.3
service timestamps debug datetime msec
service timestamps log daletime msec
no service password-encryption
!
hostname Router
!
boot-start-marker
boot-end-marker
!
!
no aaa new-model
ip subnet-zero
ip cef
!
!
!
ip audit po max-events 100
!
!
interface Ethernet0/0
description WAN
ip address 10.2.3.5 255.255.255.0
ip nat outside
full-duplex
!
interface Ethernet0/1
description LAN
ip address 192.168.1.1 255.255.255.0
ip nat inside
full-duplex
!
ip nat pool crossbones 10.2.3.1 10.2.3.254 netmask 255.255.255.0
ip nat inside source list 7 pool crossbones overload
ip http server
no ip http secure-server
ip classless
ip route 0.0.0.0 0.0.0.0 Ethernet0/0
!
!
access-list 7 permit 192.168.1.0 0.0.0.255
access-list 7 permit 10.0.0.0 0.255.255.255
dialer-list 1 protocol ip permit
!
!

line con 0
line aux 0
line vty 0 4
login
!
!
end

.

Relevant Pages

  • Re: moved a working network, now it doesnt work
    ... router I can ping the internet with no problem. ... From one of your Linux machines can you ping the FA 0/1 interface (default ... are NOT natting so if CAN ping from the router, ...
    (comp.dcom.sys.cisco)
  • Re: Cannot simultaneously share DSL connection
    ... In order to be able to use Internet with both computers at the same time the ... Router has to be the authentication device. ... The Linksys Router provides on the CD an extended manual that would explain ... happens when we try to share the internet connection. ...
    (microsoft.public.windowsxp.network_web)
  • Re: Cant Play DUNGEON SIEGE: LOA Multiplayer through Linksys Router (WRT54G)
    ... wire your Internet feed directly to your gaming ... | real issue of multiplayer over a NAT router and this game (as well as ... | I've also tried using the DMZ on the Linksys router...NO DICE. ...
    (microsoft.public.games)
  • Re: No Internet Connection w/ Router
    ... Networking, Internet, Routing, VPN Troubleshooting on ... modem and use a Linksys wrt54gs for the LAN. ... add the router the router ... connection seems to be fine but I can't get the internet connection. ...
    (microsoft.public.windowsxp.network_web)
  • Re: Routing and RRAS Problem - Pleasehelp
    ... Networking, Internet, Routing, VPN Troubleshooting on http://www.ChicagoTech.net ... but the problem is the PC's on the subnet 1 cannot access the Internet. ... router that is running a DHCP, The IP of the router is ... enable RRAS, and is running fine, Interface called INTERNET is connected to ...
    (microsoft.public.windows.server.networking)