PPP IP Address negotiation

Using Cisco Secure ACS 4.0.1 and Cisco IOS Software 12.4(6)T in a large scale dial out setup.

We are currently accessing 5000+ computers with PPP with this setup. But now we need to set up every computer with ip addresses. We want the Cisco router to assign addresses to the computers.

Can someone point out how to setup ACS or IOS to do this?


Regards
Henning Truslew Gulliksen
.

Relevant Pages

  • Re: Wits End with Networking
    ... No, it does not, but that is because the Network Setup Wizard only provides ... on each of the computers? ... The Guest account may or may not show up on the login screen. ... My Macs seemed to be able to read minds pretty easily. ...
    (microsoft.public.windowsxp.network_web)
  • Re: Howto setup a Internet cafe network???
    ... > Al Jarvi (MS-MVP Windows Networking) ... setup a wireless network for a café ... > I am planning on setting up a internet cafe with about 8-10 computers, ... can any of these OS's be used to act as a server for this ...
    (microsoft.public.windowsxp.network_web)
  • Re: Converting crypto map to unnumbered VTI
    ... Cisco IOS Software, 2800 Software, Version ... DRAM configuration is 64 bits wide with parity enabled. ... capture debug isakmp sa with this setup ... The VTI tunnel interface will not come up until the SA are built (i.e ...
    (comp.dcom.sys.cisco)
  • Re: PIX 501 QUESTIONS...what am I doing wrong here?
    ... I figured it out based on a cisco forum reply on dslreports.com. ... you set up PAT and port forwarding in this way.... ... if it is setup on 1 IP using ... > 1) Just get ICMP working. ...
    (comp.security.firewalls)
  • Re: Cisco 1720 router & OWA
    ... Yeah I would also recommend picking up a couple of books or calling Cisco themselves to help you learn this. ... Otherwise depending on your setup or if its enabled, you may be able to access all this through the SDM or web interface type http:/// and see if you get anything. ... Windows Server MVP - Directory Services ... I know how to log into the router via a console connection, ...
    (microsoft.public.exchange2000.general)