help configuring 2600, 1700 PtP T1 to business DSL
- From: bjriffel@xxxxxxxxxxx
- Date: 7 Sep 2006 09:19:42 -0700
I will apologize in advance for not knowing more about what I am doing.
I am trying to provide internet access to the director of our
department who lives beyond the reaches of broadband. We have a 6Mb
Business DSL circuit in our test lab that we wish to connect him to at
home. We have a DS3 in our data center. We have purchased a
point-to-point T1 from our DS3 to the director's house. This was
installed last week.
Our DSL issued us 5 static IP addresses and a 4 port DSL modem which is
doing no router functions, only modem and switch functions. Here is a
link to what I would like to do. I am open to suggestions.
http://img114.imageshack.us/img114/7296/ptpt1ub3.jpg
We are going to hang the 2610 in our data center and the 1720 at his
house. And yes, we are getting a sweet deal on the T1 because of the
DS3, otherwise we would have forced him into satelite internet. I
would like to have the 1720 do all routing, firewall, dhcp for his
network and not need to add another home gateway type device to his
network. We are simply using a switch and 2 Linksys wireless G APs to
provide coverage in his house.
.
- Follow-Ups:
- Prev by Date: Re: Confused about the from / to aspect of access list syntax
- Next by Date: Re: Switch Topology
- Previous by thread: QOS per vlan - need advice
- Next by thread: Re: help configuring 2600, 1700 PtP T1 to business DSL
- Index(es):
Relevant Pages
|
