PIX capture pppoe traffic
Hi,
Im having some trouble capturing traffic going out from my pix through
the outside interface.
I've turned on "capture outside interface outside"
but the capture file only contains traffic inbound to the pix not
outgoing traffic.
I really need to see what traffic is going out that interface.
Anyone else had any problems doing this on a pppoe interface?
Any suggestions appreciated.
(This is a 501 pix with 6.3.5)
-SAto
.
Relevant Pages
- Re: Interesting problem with pix 515 UR
... Consider diabling Proxy arp on inside interface. ... This pix have only 2 ethernet interfaces; i have connected the ethernet0via a cross cable ... fixup protocol dns maximum-length 512 ... ntp server 194.100.206.70 source outside ...
(comp.dcom.sys.cisco) - Interesting problem with pix 515 UR
... This pix have only 2 ethernet interfaces; i have connected the ethernet0via a cross cable ... interface FastEthernet0/21 ... fixup protocol dns maximum-length 512 ... ntp server 194.100.206.70 source outside ...
(comp.dcom.sys.cisco) - Re: One internal network, VPN, 2 PIX
... all I can ping is the internal interface on the PIX that I'm VPN'ing in to. ... Do I need to add ACL's into the Corp PIX to allow the VPN traffic (I already ... the 192.168.200.* inside hosts, the inside hosts are going to ... so the interior hosts send responses to the 501); ...
(comp.dcom.sys.cisco) - [fw-wiz] Double firewall setup (long)
... One PIX 515E w/ 3 interfaces: inside, outside, DMZ. ... access-list OUTB permit tcp 10.181.8.0 255.255.248.0 any eq www ... interface ethernet0 auto ...
(Firewall-Wizards) - Re: selective access to different classes
... IInputDevice (interface) implementation will capture the sound data ... Next few operations are done over the current input data, ...
(comp.object) |
|
