Re: Configure netflow on a cat6k
- From: "Damian" <damian@xxxxxxxxxxxxxxx>
- Date: 29 Jun 2006 15:28:27 -0700
Ntop will provide what you are looking for, not to sure what platform
you are running on, but the service is very unstable on a Windows
platform.
Also with the config for ingress only, just be aware that the traffic
analysis will only show one way traffic to.
What version of code are you running on your 6000.
Damian
udo wrote:
Hi all,
I configured netflow on a cat6k with ntop as a datacollector.
As the source I cfg a vlan interface
==================
cat 6500
interface Vlanxxx
!
ip flow-export ingress
ip route-cache flow
!
ip address x.x.x.x 255.255.255.192
no ip redirects
no ip proxy-arp
end
ip flow-export source vlan xxx
ip flow-export destination x.x.x.x 2055
==================================
right now i should collect _all_ traffic on the backplane
is this possible with ntop or should I use for MRTG ...maybe any other
freeware tool ??
thanks
udo
.
- Follow-Ups:
- Re: Configure netflow on a cat6k
- From: udo
- Re: Configure netflow on a cat6k
- References:
- Configure netflow on a cat6k
- From: udo
- Configure netflow on a cat6k
- Prev by Date: Re: understand multicasting from the client/host perspective .
- Next by Date: monitor spanned port from dual NIC'd fedora machine
- Previous by thread: Configure netflow on a cat6k
- Next by thread: Re: Configure netflow on a cat6k
- Index(es):
Relevant Pages
|
