I am trying to setup pix to receive rip. After I enabled rip on interface,
and when remote peer is trying to send rip packets, fw denies them with
message
acl denied
and I cannot se acl on the same interface where destination is fw
interface. How to resolve this
.
Re: Agfa Viper RIP and PowerMac G3 - engineless mode ... I bought SelectSet 5000 imagesetter with Viper RIP (interface box) and old ... for Agfa units a long time ago and pretty sure the Selectset used athe APIS ... system, which may have had a cable which looked like SCSI, but was not ... (comp.publish.prepress)
Re: Windows 2003 RIP LAN ROUTER and its efficient for 500 Users?? ... Thanks for your reply, I use static route, however, I had to add RIP on ...Public LAN....Interface 1 has the same LAN with all of our servers (Intel Port ... of other routers running RIP.... (microsoft.public.win2000.ras_routing)
Re: RIP not working on 2821/12.4.20T ...interface FastEthernet0/0...router rip...network 172.31.1.0 ... Again, make sure that the two routers running RIP have a good connection to each other, have interfaces up that will be advertised through RIP, and both are advertising the network range which they use to connect to each other. ... (comp.dcom.sys.cisco)
Re: Scitex PS/M-L2 and Power Macs ...ethernet interface.... card wil not work on a G3 or on Mac OS 8.x which seems to be the ... My RIP is Scitex PS/M L2 version 4.0. ... (comp.publish.prepress)
Re: Scitex PS/M-L2 and Power Macs ...ethernet interface.... card wil not work on a G3 or on Mac OS 8.x which seems to be the ... My RIP is Scitex PS/M L2 version 4.0. ... (comp.publish.prepress)
