internet ip to local ip with pix


Hello All,


Our network is
pix inside 10.112.2.241
pix outside 192.168.0.1


Adsl Modem 192.168.0.2


Our local ip grup 10.112.x.x. I want to make nat to acces 10.2.2.2 with



23 port.
How can i do? or second way How can i define local ip to iincoming
connection likely windows rras?


Best Regards
Özgür


Cevapla »


Gönderen: Walter Roberson - profili göster
Tarih: Cuma 2 Haziran 2006 20:54
E-posta: rober...@xxxxxxxxxxxx (Walter Roberson)
Gruplar: comp.dcom.sys.cisco
Henüz derecelendirilmemisSiniflama:
seçenekleri göster


Cevapla | Yazara Cevap Ver | Ilet | Yazdir | Sadece Mesaj | Aslini
göster | Kötüye Kullanimi Bildir | Bu yazarin mesajlarini bul


In article <1149257609.351054.60...@xxxxxxxxxxxxxxxxxxxxxxxxxxxx>,



<ozgur...@xxxxxxxxx> wrote:
Our network is
pix inside 10.112.2.241
pix outside 192.168.0.1
Adsl Modem 192.168.0.2
Our local ip grup 10.112.x.x. I want to make nat to acces 10.2.2.2 with
23 port.
How can i do?


Is 10.2.2.2 inside or outside the network? If it is inside the
network, then you will need an internal router because 10.2.2.2
is not in the same subnet as your inside interface 10.112.2.241 .
You would need a 'static' command, and you would need a 'route'
command,
and you would need to alter the access-list that you have applied
to the outside interface by using the access-group command.

If 10.2.2.2 is outside your network, then as you want to use NAT to
access the address, we need to know whether 10.2.2.2 is the form of
the IP that internal users are to use to reach the outside resource,
or if 10.2.2.2 is the outside IP and you want the internal users to
use some other IP to access it ?



or second way How can i define local ip to iincoming
connection likely windows rras?


Sorry, please rephrase the question indicating where each
part is relative to the other parts and which IP you are trying to use
to access what.

Cevapla » Bu gönderiyi degerlendirin Text for clearing space


Gönderen: ozgur...@xxxxxxxxx - profili göster
Tarih: Ptesi 5 Haziran 2006 09:40
E-posta: ozgur...@xxxxxxxxx
Gruplar: comp.dcom.sys.cisco
Henüz derecelendirilmemisSiniflama:
seçenekleri göster


Cevapla | Yazara Cevap Ver | Ilet | Yazdir | Sadece Mesaj | Aslini
göster | Kaldir | Kötüye Kullanimi Bildir | Bu yazarin
mesajlarini bul


Hi Thank you for you help,
The route command has exciced in configuration.
-- route inside 10.2.22 255.255.255.255 10.112.2.254. 1


10.112.2.254 is a cisco router.


What can I do?


Regards


Cevapla »


Gönderen: Walter Roberson - profili göster
Tarih: Sali 6 Haziran 2006 06:22
E-posta: rober...@xxxxxxxxxxxx (Walter Roberson)
Gruplar: comp.dcom.sys.cisco
Henüz derecelendirilmemisSiniflama:
seçenekleri göster


Cevapla | Yazara Cevap Ver | Ilet | Yazdir | Sadece Mesaj | Aslini
göster | Kötüye Kullanimi Bildir | Bu yazarin mesajlarini bul


In article <1149490376.985267.325...@xxxxxxxxxxxxxxxxxxxxxxxxxxxx>,


<ozgur...@xxxxxxxxx> wrote:
E-posta: rober...@xxxxxxxxxxxx (Walter Roberson)
Is 10.2.2.2 inside or outside the network? If it is inside the
network, then you will need an internal router because 10.2.2.2
is not in the same subnet as your inside interface 10.112.2.241 .
You would need a 'static' command, and you would need a 'route'
command,
and you would need to alter the access-list that you have applied
to the outside interface by using the access-group command.
The route command has exciced in configuration.
-- route inside 10.2.22 255.255.255.255 10.112.2.254. 1
What can I do?


Well, like I wrote, you need a static command and you need
to alter the access-list that you have applied to the outside
interface by using the access-group command.

The Cisco PIX online documentation has numerous examples.


Cevapla » Bu gönderiyi degerlendirin Text for clearing space


Gönderen: ozgur...@xxxxxxxxx - profili göster
Tarih: Sali 6 Haziran 2006 16:42
E-posta: ozgur...@xxxxxxxxx
Gruplar: comp.dcom.sys.cisco
Henüz derecelendirilmemisSiniflama:
seçenekleri göster


Cevapla | Yazara Cevap Ver | Ilet | Yazdir | Sadece Mesaj | Aslini
göster | Kaldir | Kötüye Kullanimi Bildir | Bu yazarin
mesajlarini bul


Thank you Roberson ,

Yes I have add but telnet command does not work because the internet ip

should be local ip. For example 85.141.XX.XX ip should 10.X.X.X .


What can i do?


Best Regrads

.

Relevant Pages

  • pix nat
    ... pix inside 10.112.2.241 ... I want to make nat to acces 10.2.2.2 with ... Is 10.2.2.2 inside or outside the network? ... You would need a 'static' command, and you would need a 'route' ...
    (comp.dcom.sys.cisco)
  • Re: Dynamic Outside Translation
    ... :inside network is 10.0.0.0 /24. ... :another router on the inside of the PIX. ... The 'static' command enables outside systems to initiate connections ...
    (comp.dcom.sys.cisco)
  • Re: pix dhcp and nat
    ... pix inside 10.112.2.241 ... Is 10.2.2.2 inside or outside the network? ... You would need a 'static' command, and you would need a 'route' command, ... the IP that internal users are to use to reach the outside resource, ...
    (comp.dcom.sys.cisco)
  • Re: Dial-up clients drop connections
    ... Both products physically synchronize with the respondent modem, authenticate, attempt to "talk to the network", then drop the connection. ... Extreme cases may warrant the removal of the TCP/IP protocol..With the NetShell utility, you can reset the TCP/IP stack to restore it to its state that existed when the operating system was installed. ... When you run the reset command, it rewrites pertinent registry keys that are used by the Internet Protocol stack to reach the same result as the removal and the reinstallation of the protocol. ...
    (microsoft.public.windowsxp.general)
  • Re: networking problem
    ... > Static IP address configuration in Windows XPe environment HOWTO ... > To be able to be pingable with one ethernet card in your target machine, ... > Network Command Shell ... > Command Shell Interface Context ...
    (microsoft.public.windowsxp.embedded)