Backup Async going up and down.
- From: "John Smith" <someone@xxxxxxxxxxxxx>
- Date: Wed, 31 May 2006 12:32:12 GMT
To the Cisco people who know best,
I currently have a 2811 (Corporate) router and a 1811 (Remote) router. The
2811 has an eight port analog card in it for supporting all of my locations
for backup. Right now everything is working correctly except for the Async
connection dropping many times during its "connection" period. If I unplug
the main connection from either router it will automatically dial out to the
2811 router and traffic will work fine for a while. I configured the backup
to only allow traffic to the AS/400.
During a three hour period of being down, the Async went down and backup 17
times with time frames of being up from 3 minutes to 20 minutes. Of course
the people at our remote location didn't appreciate being kicked off 17
times and felt that the backup was a joke. The reason for the dial up is
because we only need the remote locations to get to the AS/400 which doesn't
need much bandwidth at all. This is a solution that I would like to
implement at all my locations but until I get this one to work properly, I
am not purchasing anything else.
I would appreciate any suggestions or things to look for to keep these line
up.
Thanks,
Jason Baker
.
- Prev by Date: Re: Console problem from Linux
- Next by Date: Re: software to manage cisco access points
- Previous by thread: VPN site-to-site not working with PIX 501s
- Next by thread: Active Network Abstraction?(Cisco)
- Index(es):
Relevant Pages
|
|
