about CISCO RPS 675

Relevant Pages

• Re: Do I need a switch with VLAN and QoS?
  ... I am also not a fan of Cisco's RPS solution for the same reasons plus a few ... I think you can switch it back without a reboot, ... We had one location that had a bad power circuit and the thing would ... Cisco encourages other vendors to supply products, ...
  (comp.dcom.sys.cisco)
• Re: Do I need a switch with VLAN and QoS?
  ... external RPS which can act as a redundant power supply if ... you were to lose a Power supply on one switch. ... And then if you do lose external power, you have to reboot the switch ...
  (comp.dcom.sys.cisco)
• ABOUT RPS 675 AGAIN
  ... USE RPS 675 AS A POWER FAILURE BACK UP FOR THE DEVICE..ATTACH WITH IT ... SWITCH OR THE DEVICE ATTACH TO IT WILL USE THE NORMAL POWER ..NOT FROM ... THE RPS WITHOUT REBOOTING THE SWITCH ... ...
  (comp.dcom.sys.cisco)
• Re: Bridgeport boss 4 Spindle not powering up (continued)
  ... you need to reset a safety interlock on the motor switch pod ... I can work my way through the average power ... activate the spindle all he would get would be a buzzing sound. ... each for a different axis stepper motor drive). ...
  (rec.crafts.metalworking)
• Re: PC doesnt start
  ... With the switch pressed the voltage are within the specs but, ... I measured the voltage at the Power switch plug, when connected to the MoBo, ... Why then would a power switch or connections be ...
  (microsoft.public.windowsxp.hardware)