Re: PIX 515e w/ 7.0(4) from 6.3 - No more PPTP?


So is PPTP no longer supported?

isco docs indicate that PIX 7.0 does not yet support the termination of
PPTP

http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_tech_note09186a00804708d8.shtml

.

Relevant Pages

  • Re: PIX 501 VPN RAS
    ... >PPTP is not supported by PIX itself. ... There was a short thread last year sometime pointing out that GRE does ... PIX 7.0 does not support L2TP over IPSec. ...
    (comp.dcom.sys.cisco)
  • Re: 2 vpn clients on Home LAN
    ... and the PIX both support NAT traversal, ... support it, you can still use traditional IPSec. ...
    (comp.dcom.sys.cisco)
  • [PATCH 1/22] trivial: fix typo "a a" in multiple files
    ... * Returns zero if volume is all right and a a negative error code if not. ... NAT support for PPTP (Point to Point Tunneling Protocol). ...
    (Linux-Kernel)
  • Re: PIX 501 VPN RAS
    ... >>PPTP is not supported by PIX itself. ... >>forward GRE protocol, which does not contain any session information. ... The implementations out there does not support an RfC but a number of drafts ...
    (comp.dcom.sys.cisco)
  • Re: PPTP CHAP failure problem
    ... Did you apply all the patches to support MPPE? ... You're sending the username ... I don't know anything at all about running a Windows PPTP server. ...
    (comp.os.linux.networking)
Loading