2524 12.3 Crashing Loop
- From: "william" <wwalla@xxxxxxxxx>
- Date: 11 Mar 2006 10:47:23 -0800
I posted this on GS but I am not sure that it was sent out. I
appreciate any of my fellow cisco friends help on this 2524 issue!
Below will be a cut and paste from my Post:
Guys/Ladies-
How do I fix this mess? I upgraded the ios to 12.3 (Must have been the
wrong one.) It was small enough to fit into flash and when it loaded it
had a memory allocation failure. Then it tries to load from the TFTP
server where I got the image from. Below:
Any help is appreciated!
Restricted Rights Legend
Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706
Cisco Internetwork Operating System Software
IOS (tm) 2500 Software (C2500-IS-L), Version 12.3(13b), RELEASE
SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2005 by cisco Systems, Inc.
Compiled Thu 11-Aug-05 15:58 by alnguyen
Image text-base: 0x0307D43C, data-base: 0x00001000
SYSTEM INIT: INSUFFICIENT MEMORY TO BOOT THE IMAGE!
%Software-forced reload
Unexpected exception to CPU vector 34, PC = 3396110
-Traceback= 3396110 337724C 3377A78 339CBE8 3389A1C 3389C3E 363E80C
339133E 33913BC 32B0298 32B05D4
=== Flushing messages () ===
Buffered messages:
Queued messages:
*Mar 1 00:00:08.491: %SYS-3-LOGGER_FLUSHING: System pausing to ensure
console debugging output.
*Mar 1 00:00:08.147: %SYS-2-MALLOCFAIL: Memory allocation of 4000 bytes
failed from 0x339CBE0, alignment 0
Pool: Processor Free: 0 Cause: Not enough free memory
Alternate Pool: I/O Free: 0 Cause: Not enough free memory
-Process= "Init", ipl= 4, pid= 3
-Traceback= 33771CE 3377A78 339CBE8 3389A1C 3389C3E 363E80C 339133E
33913BC 32B0298 32B05D4
Unexpecte
System Bootstrap, Version 11.0(10c), SOFTWARE
Copyright (c) 1986-1996 by cisco Systems
2500 processor with 2048 Kbytes of main memory
SERVICE_MODULE(0): self test finished: Passed
%SERVICE_MODULE-4-ACCESSERROR: Unit 0 reports register access error -
bad register value supplied
Loading c2500-is-l.123-13b.bin from 192.168.1.100 (via Ethernet0):
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
[buffer overflow - 1205760/1205542 bytes]
F3: 15283864+878576+940428 at 0x3000060
System Bootstrap, Version 11.0(10c), SOFTWARE
Copyright (c) 1986-1996 by cisco Systems
2500 processor with 2048 Kbytes of main memory
SERVICE_MODULE(0): self test finished: Passed
Loading c2500-is-l.123-13b.bin ... [timed out]
F3: 15283864+878576+940428 at 0x3000060
.
- Follow-Ups:
- Re: 2524 12.3 Crashing Loop
- From: Doug McIntyre
- Re: 2524 12.3 Crashing Loop
- Prev by Date: Secure a wireless LAN with a PIX 501?
- Next by Date: Re: 871W Cannot Get DHCP Address - Cable Modem
- Previous by thread: Secure a wireless LAN with a PIX 501?
- Next by thread: Re: 2524 12.3 Crashing Loop
- Index(es):
Relevant Pages
|