Re: Bandwidth Utilization for PIX Rookie

In article <1141073112.860181.158480@xxxxxxxxxxxxxxxxxxxxxxxxxxxx>,
<langley101@xxxxxxx> wrote:
I've inherited a PIX 506e at a new client. I've learned enough to setup
the PIX handing out DHCP addresses and allowing access to an FTP server
behind the firewall. I now think that I have a system inside the office
taking up most of my T1 bandwidth. Is it possible for the 506e, with
PDM 3.0(1), to tell me which IP address inside the office is using the
most bandwidth?


Please see
http://groups.google.ca/group/comp.dcom.sys.cisco/msg/37ddb0b6234c1e48
.

Relevant Pages

  • RE: Internet Cafe
    ... Unfortunately the current Firewall does not support any kind of bandwidth ... Subject: Internet Cafe ...
    (Security-Basics)
  • Re: IP address spoofing
    ... >These are mostly UDP packets being dropped. ... You don't need a firewall to stop ... bandwidth' over the wire, there really isn't that much you can do ... If you are lucky, your ISP might be ...
    (comp.security.firewalls)
  • Re: Routing IP cameras to internet
    ... quality by reducing bandwidth overhead. ... SBS2003STD 2NICs with Netgear FVS318 Prosafe firewall router. ... SBS service ports pass firewall packets to sbs server WAN. ... gather images from cameras during security events. ...
    (microsoft.public.windows.server.sbs)
  • RE: Firewall on 1gb connection
    ... some good bandwidth in order to support its needs, however, it is not ... Such a router would generally be categorised as a CORE ... You can then firewall the departmental routers ... policy implementation according to differing needs. ...
    (Security-Basics)
  • Re: Port Attack Question
    ... Mark - The problem is one of the processing on the firewall and available ... The port whether it is POP/SMTPor HTTPis irrelevant aside from the ... connections and may slow the firewall down if enough connections are ... If the attackerhad enough bandwidth or networks to bounce the ...
    (comp.security.firewalls)