2900XL with fibre?
- From: "Tom Linden" <tom@xxxxxxxxxx>
- Date: Mon, 27 Feb 2006 15:49:16 -0800
Running VMS cluster over 2900XL switch, recently added
SAN with 1 Gbit fibre. I note that the 1 Gigabit TCP/IP interface
is the same connector as the GBIC modules. Can this be made to talk
to a Brocade SAN switch over SC/IP?
.
Relevant Pages
- rdac failover failing for DS4300 SAN
... I have a DS4300 SAN with 2 controllers, ... each controller has one fibre connected to each switch. ... To test the resilience I have been pulling fibres from the back of the ...
(comp.unix.aix) - Re: AIX and DS4300 Errors
... if yes try to reset controller's port on the SAN (maybe by SAN's ... 4500 switch which is in turn connected to a controller. ...
(comp.unix.aix) - JNI card connectivity with IBM ESS
... V880 server in a SAN environment.The switch type is IBM 2109-F16 and the ... Storage is IBM ESS 2105-F20. ... SAN foundation kit. ...
(SunManagers) - Brief on HSG80 SCSI-3 to SCSI-2 reconfiguration
... The saga of a SAN reconfiguration... ... The switch to SCSI-2 and transparent failover would be ... This will interrupt access to any disks ...
(Tru64-UNIX-Managers) - Re: The logical disk not on preferred path...Fast700 & AIX
... Yes i am using two SAN switches. ... switch is duplicated in two zone (i.e CTLR-B Zone and Tapedrive ... 2)The errors appearing on AIX host are saying " Array Controller ... Switch " and "Array Configuration changed". ...
(comp.unix.aix) |
|
