Re: Vlan Interface drops

<sieber@xxxxxxxxxxx> wrote in message
news:1140653124.035939.190820@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
I need an explination of the Show Interface Vlan command if anyone can
help me with this.

I am troubleshooting QOS issues on a switched network, and have found
both output and input drops on vlan interfaces. Since a vlan
interface is has no physical port associated with it, I am having a
hard time understanding why the packets would be dropped. I am not
seeing drops at any of the physical interfaces between the hosts in
question, only at the vlan interface. The hosts are obviously on
different subnets, and are routed via this vlan interface.

You're saying that this is related to QoS. Did you attach a 'service-policy'
to this VLAN interface then? If yes, using 'show policy interface Vlan<N>
output|input' will tell you wether packets are dropped due to policy.

Another reason for packet drops on the input could be due to process
switching of high volume traffic. Check if CEF is running on that interface.

Kind regards,
iLya


.

Relevant Pages

  • Newbie Question: 802.1q and VLAN interfaces on 877w
    ... from my ISP and a few PCs on the local network. ... Any traffic from the phones should be routed without ... VLAN interfaces on the router, ... Each VLAN would have it's own VLAN interface with a seperate DHCP ...
    (comp.dcom.sys.cisco)
  • Re: Zones, VLANs and aggregated interfaces...
    ... recommended patches) and I'm trying the same (zone, vlan, aggregate). ... still having their own VLAN interface. ... I can't seem to get the zone to accept the "aggr3328001" VLAN interface, ...
    (comp.unix.solaris)
  • Re: Zones, VLANs and aggregated interfaces...
    ... recommended patches) and I'm trying the same (zone, vlan, aggregate). ... still having their own VLAN interface. ...
    (comp.unix.solaris)
  • [patch netdev-2.6 0/2] r8169: vlan hwaccel fixes
    ... After taking a little time to implement vlan hwaccl features for the ... rtl8169_vlan_rx_registeris called w/ a non-NULL grp value when ... the first vlan interface is created, then w/ a NULL grp value when the ... the RxVlan bit in the CPlusCmd register is being turned-off ...
    (Linux-Kernel)
  • Re: bge data corruption bug (was: 1168 octets payload and bad TCPchecksums)
    ... but the difference is the same even for other packets). ... > dword of the transmitted frame is getting corrupted in hardware. ... > with 1168 octets of payload, using vlan tagging on the bge interface. ... bge interface for one supported by the sk or em driver solves the problem. ...
    (freebsd-net)