Re: Setup a SIMPLE VPN with my PIX515e

Thanks..

Been trying to find updates the the pix and the new client software,
but to no avail. Cisco's site is a maze.. a dark, dank, smelly maze!
:o)

Thanks for the vpn config, will give it a try!

Matt

On Thu, 16 Feb 2006 03:37:00 GMT, roberson@xxxxxxxxxxxx (Walter
Roberson) wrote:

In article <3bk6v1tfn88f83527h2rfpia7m0p11nnqe@xxxxxxx>,
<askmeforit@xxxxxxxxx> wrote:
We have a PIX515E device.

It is currently running:
Cisco PIX Firewall Version 6.3(3)

You should upgrade to at least 6.3(4) for security fixes.

I have the VPN Client CD which came with the device. It contains Cisco
VPN Client 3.6.0 and 4.0.1 for Windows.

I suggest loading down newer versions from Cisco.


I need to know how to (simply) setup the PIX and use this VPN Client
software, either the 3.6.4 or the 4.0.1, to connect.

I do not want an Auth server other than the PIX. I want to create
user name and password ON the PIX.

crypto ipsec TRANSFORMSET esp-3des esp-sha-hmac
crypto dynamic-map vpnclient-dyn-map 1001 set transform-set TRANSFORMSET

aaa-server LOCAL protocol local

crypto map vpn-map ipsec-isakmp dynamic vpnclient-dyn-map
crypto map vpn-map client authentication LOCAL

username roberson password 29afaf53d1 encypted privilege 1
.

Relevant Pages

  • Loss of VPN Access Using Pix 501
    ... I have a client who is using a Pix 501, ... Establish secure connection using Ethernet ... Peer supports XAUTH ...
    (comp.dcom.sys.cisco)
  • RE: [fw-wiz] Cisco PiX 501 running 6.2 - Defying me for no reason
    ... >>connected with the PiX between it). ... > assign static IPs, so when I transfered the static to the firewall, the ... I cannot ping names, such as ... server and have it issue an IP and DNS server to your client PC? ...
    (Firewall-Wizards)
  • Re: INTERNET ACCESS AND CISCO PIX FIREWALL
    ... 2 client PCs are in another room and I would prefer to give them ... replace the Cisco Pix Firewall with a wireless firewall router? ... Microsoft MVP - Windows Server Directory Services ...
    (microsoft.public.windows.server.networking)
  • Re: SBS VPN vs Router VPN
    ... I'm using one NIC on the server, and the pix 506e only has one internet ... The higher level pix models can take two. ... Is your router or SBS doing DHCP? ... Configure the PIX for remote vpn access, then install the client on the ...
    (microsoft.public.windows.server.sbs)
  • Re: [fw-wiz] PIX denying SSH Access - until I run PDM?
    ... >PIX with this affliction? ... >userid/password the client will simply sit there and stare at me while doing ... >PIX via PDM after the failed SSH attempt - even if the PDM connection is not ...
    (Firewall-Wizards)