AS5400 configuration help
- From: "FixitDave" <david.sawyer@xxxxxxxxxxxx>
- Date: 15 Feb 2006 08:14:01 -0800
I'm trying to setup an AS5400 for in/out modem/ISDN access, firstly I'd
just like to configure for modem access, but when I dial into it I get
the following output (debug isdn q931, isdn error & spe modem
errors)...The dialing modem just keeps whistling then responds with 'no
carrier'
Jan 3 04:56:56.826 gmt: ISDN Se7/0:15 Q931: RX <- SETUP pd = 8
callref = 0x0001
Sending Complete
Bearer Capability i = 0x8090A3
Standard = CCITT
Transer Capability = Speech
Transfer Mode = Circuit
Transfer Rate = 64 kbit/s
Channel ID i = 0xA98381
Exclusive, Channel 1
Called Party Number i = 0x81, '376800'
Plan:ISDN, Type:Unknown
Jan 3 04:56:56.826 gmt: PM_ST_MODEM_ERR: pm_modem_mgmt_get_modem_parm:
no hwidb/tty
Jan 3 04:56:56.830 gmt: ISDN Se7/0:15 Q931: TX -> CALL_PROC pd = 8
callref = 0x8001
Channel ID i = 0xA98381
Exclusive, Channel 1
Jan 3 04:56:56.830 gmt: ISDN Se7/0:15 Q931: TX -> ALERTING pd = 8
callref = 0x8001
Jan 3 04:56:56.834 gmt: ISDN Se7/0:15 Q931: TX -> CONNECT pd = 8
callref = 0x8001
Jan 3 04:56:56.934 gmt: ISDN Se7/0:15 Q931: RX <- CONNECT_ACK pd = 8
callref = 0x0001
****debug waits here for a while, then 'no carrier' on dialing
modem****
Jan 3 04:57:52.247 gmt: ISDN Se7/0:15 Q931: RX <- DISCONNECT pd = 8
callref = 0x0001
Cause i = 0x8090 - Normal call clearing
Progress Ind i = 0x8288 - In-band info or appropriate now
available
Jan 3 04:57:52.247 gmt: ISDN Se7/0:15 Q931: TX -> RELEASE pd = 8
callref = 0x8001
Jan 3 04:57:52.307 gmt: ISDN Se7/0:15 Q931: RX <- RELEASE_COMP pd = 8
callref = 0x0001
Jan 3 04:57:53.327 gmt:
%MODEMCALLRECORD-6-PM_TERSE_CALL_FAILED_RECORD: DS0
slot/contr/chan=7/0/1, slot/port=1/13, call_id=E, calli
ng=(n/a), called=376800, time=0, finl-state=Half Duplex Train,
disc(modem)=1F06 <unknown>/Requested by host/network indicated discon
nect
Jan 3 04:57:53.327 gmt: %PM_MODEM_HIST-7-TRACE_HDR:
Modem 1/13 Events Log:
Jan 3 04:57:53.327 gmt: %PM_MODEM_HIST-7-PORT_STATE_REACHED_NTF_EVT:
Jan 1 00:03:47.843 gmt: Port State Reached:
Jan 3 04:57:53.327 gmt: %PM_MODEM_HIST-7-PORT_STATE_REACHED_NTF_EVT:
Jan 1 00:03:47.847 gmt: Port State Reached:
Jan 3 04:57:53.327 gmt: %PM_MODEM_HIST-7-CSM_IC_CALLED_NUM:
Jan 3 04:56:56.830 gmt: ISDN incoming called number: 376800
Jan 3 04:57:53.327 gmt: %PM_MODEM_HIST-7-PORT_STATE_REACHED_NTF_EVT:
Jan 3 04:56:56.834 gmt: Port State Reached:
Jan 3 04:57:53.327 gmt: %PM_MODEM_HIST-7-PORT_STATE_REACHED_NTF_EVT:
Jan 3 04:56:56.942 gmt: Port State Reached:
Jan 3 04:57:53.331 gmt: %PM_MODEM_HIST-7-MODEM_STATE_EVT:
Jan 3 04:56:56.942 gmt: Modem State event:
State: Connect
Jan 3 04:57:53.331 gmt: %PM_MODEM_HIST-7-MODEM_STATE_EVT:
Jan 3 04:56:59.366 gmt: Modem State event:
State: V.8bis Exchange
Jan 3 04:57:53.331 gmt: %PM_MODEM_HIST-7-MODEM_STATE_EVT:
Jan 3 04:57:00.638 gmt: Modem State event:
State: Quick Connect
Jan 3 04:58:00.291 gmt: %CALLTRKR-6-CALL_RECORD: ct_hndl=23,
service=None, origin=Answer, category=Modem, DS0 slot/port/ds1/chan=7/
0/0/0, called=376800, calling=(n/a), resource slot/port=1/13,
userid=(n/a), ip=0.0.0.0, mask=0.0.0.0, account id=165, setup=01/03/20
00 04:56:54, conn=0.11, phys=0.00, service=0.00, authen=0.00,
init-rx/tx b-rate=64000/64000, rx/tx chars=0/0, time=55.42, disc subsy
s=ISDN, disc code=0x10, disc text=Normal call clearing
Jan 3 04:58:00.291 gmt: %CALLTRKR-6-MODEM_CALL_REC: ct_hndl=23, prot:
last=SYNC Mode, attempt=SYNC Mode, comp: last=None, atmp= Non
e, std: last=V.21, attempt=V.21, init=V.21, snr=0, sq=0, rx/tx:
chars=0/0, ec: rx/tx=0/0, rx bad=0, rx/tx b-rate: last=13408/13408,
low=13408/13408, high=300/300, desired-client=(n/a)/(n/a),
desired-host=(n/a)/(n/a), retr: local=0, remote=0, fail=0, speedshift:
lo
cal up/down=0/0, remote up/down=0/0, fail=0, v90: stat=No Attempt,
client=(n/a), fail=None, time(sec)=0, disc reason=0x1F06
Jan 3 04:58:00.291 gmt: %CALLTRKR-6-MODEM_LINE_CALL_REC: ct_hndl=23,
rx/tx levl=0/255, phase-jit: freq=0.0, levl=0, far-end echo-le
vl=0, freq offst=0.0, phase-roll=0.0, round-trip=0, d-pad=None, d-pad
comp=0, rbs=0, const=None rx/tx: sym-rate=0/0, carr-freq=0/0,
trel-code=0/0, preemph-index=0/0, rx/tx: const-shape=Off/Off,
nonlin-encode=Off/Off, precode=Off/Off, xmit levl-reduct=0/0, shape=0x
0000000000000000000000000000000000000000000000000000
Jan 3 04:58:00.295 gmt: %CALLTRKR-6-MODEM_INFO_CALL_REC: ct_hndl=23,
general info=0x0, rx/tx link-layer=0/0, NAKs=0/0, rx/tx ppp-sl
ip=0/0, bad ppp-slip=0, proj max rx b-rate: client=0, host=0, rx/tx:
max neg I frame=0/0, neg window=0/0, T401 timeouts=0, tx window
closures=0, rx overruns=0, retrans frames=0, v110: rx good=0, rx
bad=0, tx=0, sync-lost=0, ss7/cot=0x00, v42bis size: dict=0, strin
g=0, test err=0, reset=0, v0 synch-loss=0, mail lost: host=0, sp=0,
diag=0x00000000000000000000000000000000
Jan 3 04:58:00.295 gmt: %CALLTRKR-6-MODEM_NEG_CALL_REC: ct_hndl=23,
v90 train=0x00000000, v90 sgn-ptrn=0x00000000, state trnsn=0x00
00000000000000000000000000000000000000000000000000000000000000,
phase2=0x00000000000000000000000000000000000000000000000000000000000
00000000000000000000000000000000000000000000000000000
My config is (some lines have been left out to try and reduce the post
length)...
version 12.3
no service pad
service timestamps debug datetime msec localtime show-timezone
service timestamps log datetime msec localtime show-timezone
service password-encryption
service compress-config
!
hostname HDWD-GW-DIAL1
!
no boot startup-test
enable secret 5 xxxxxxxxxxxxxxxxxxxxx
!
username administrator password 7 xxxxxxxxx
username manager privilege 6 password 7 xxxxxxxxx
username test password 0 test
!
!
resource-pool disable
clock timezone gmt 0
clock summer-time bst recurring
clock calendar-valid
calltracker enable
calltracker history max-size 200
calltracker call-record verbose
spe call-record modem
!
spe default-firmware spe-firmware-1
aaa new-model
!
!
aaa authentication login netenguk group tacacs+ line
aaa authentication login console group tacacs+ none
aaa authentication ppp default group tacacs+ none
aaa authentication ppp ppptac group tacacs+ none
aaa authorization exec netenguk group tacacs+ none
aaa authorization commands 15 netenguk group tacacs+ none
aaa accounting exec default start-stop group tacacs+
aaa accounting commands 15 default start-stop group tacacs+
aaa session-id common
ip subnet-zero
ip domain name 555.co.uk
ip name-server 5.5.31.7
ip name-server 5.5.95.7
!
ip cef
ip address-pool local
ip dhcp-server 5.5.31.7
ip dhcp-server 5.5.95.7
mpls ldp logging neighbor-changes
isdn switch-type primary-net5
isdn voice-call-failure 0
no scripting tcl init
no scripting tcl encdir
!
!
!
!
!
!
!
!
no voice hpi capture buffer
no voice hpi capture destination
!
!
!
!
!
!
!
!
!
controller E1 7/0
framing NO-CRC4
pri-group timeslots 1-30
!
controller E1 7/1
!
controller E1 7/2
!
controller E1 7/3
!
controller E1 7/4
!
controller E1 7/5
!
controller E1 7/6
!
controller E1 7/7
bridge irb
!
!
interface Loopback0
ip address 192.168.240.231 255.255.255.255
no ip mroute-cache
!
interface FastEthernet0/0
ip address 5.5.20.2 255.255.255.0
no ip mroute-cache
duplex auto
speed auto
!
interface FastEthernet0/1
no ip address
shutdown
duplex auto
speed auto
!
interface Serial0/0
no ip address
shutdown
clockrate 2000000
!
interface Serial7/0
no ip address
shutdown
!
interface Serial0/1
no ip address
shutdown
clockrate 2000000
!
interface Serial7/0:15
no ip address
encapsulation ppp
no ip route-cache
dialer rotary-group 1
dialer-group 1
isdn switch-type primary-net5
isdn incoming-voice modem
isdn calling-number 376800
no fair-queue
no cdp enable
!
interface Group-Async0
ip unnumbered FastEthernet0/0
encapsulation ppp
no ip mroute-cache
async mode dedicated
peer default ip address pool pool_dialup
ppp authentication chap pap callin
group-range 1/00 1/107
hold-queue 75 in
!
interface Group-Async1
ip unnumbered FastEthernet0/0
no ip route-cache
no ip mroute-cache
dialer in-band
dialer rotary-group 1
async default routing
async mode dedicated
peer default ip address pool pool_dialup
ppp authentication chap pap callin
group-range 3/00 3/59
!
interface Dialer1
ip unnumbered FastEthernet0/0
encapsulation ppp
no ip mroute-cache
dialer in-band
dialer idle-timeout 2700 either
dialer watch-group 1
dialer-group 1
peer default ip address pool pool_dialup
no fair-queue
no cdp enable
ppp authentication chap pap callin
ppp multilink
!
ip local pool pool_dialup 5.5.20.245 5.5.20.250
ip classless
ip route 0.0.0.0 0.0.0.0 5.5.20.254
no ip http server
no ip http secure-server
!
!
dialer-list 1 protocol ip permit
!
voice-port 7/0:D
!
ss7 mtp2-variant Bellcore 0
ss7 mtp2-variant Bellcore 1
ss7 mtp2-variant Bellcore 2
ss7 mtp2-variant Bellcore 3
!
line 1/00 1/107
exec-timeout 0 0
no flush-at-activation
modem InOut
rotary 1
transport input all
line 3/00 3/59
exec-timeout 0 0
no flush-at-activation
modem InOut
rotary 1
transport input all
!
scheduler allocate 10000 400
end
.
- Follow-Ups:
- Re: AS5400 configuration help
- From: genki
- Re: AS5400 configuration help
- Prev by Date: Setup a SIMPLE VPN with my PIX515e
- Next by Date: Re: Allow all traffic from one external IP inside
- Previous by thread: Setup a SIMPLE VPN with my PIX515e
- Next by thread: Re: AS5400 configuration help
- Index(es):
Relevant Pages
|
Loading
