Vpn Client and Win 2003

Ciao I have installed Cisco Vpn Client 4.8 on Windows 2003 server
My client connect to Pix without error but this is the log and the
errors on VpnClient

10 14:28:43.153 02/14/06 Sev=Warning/2 CVPND/0xE3400013
AddRoute failed to add a route: code 87
Destination 192.168.0.0
Netmask 255.255.255.0
Gateway 192.168.221.10
Interface 192.168.221.10

So i cant ping any host inside.
Note that this not happens when i connect from a different pc, my
notebook for example.
What i can do?
Thanks
Carlo

.

Relevant Pages

  • AD VPN issue
    ... I have a strange error on one of my subnets connected vith VPN (PIX 501 to ... to a windows 2003 server. ... Windows cannot obtain the domain controller name for your computer network. ... everything seems to work fine but theese error ...
    (microsoft.public.windows.server.active_directory)
  • Re: DNS Probleme
    ... Welchen Stand hat deine PIX? ... > Server mit Windows Server 2003 Standard. ... > Gruss Kollegen ...
    (microsoft.public.de.german.windows.server.active_directory)
  • Re: PIX 501 VPN RAS
    ... Terminal Server and be able to access any drive on any server on our ... > So the Pix itself is behind NAT. ... > Forget about L2TP over native IPSec (Windows VPN) ... PIX 7.0 does not support L2TP over ...
    (comp.dcom.sys.cisco)
  • Re: IPSEC Microsoft IAS Authentication - Cisco VPN Client
    ... I've set up a configuration, with a Pix 515 and Windows 2003 though, ... with my Pix setup, it might work with your IOS setup as well. ... Has anybody successfully setup the Cisco VPN client so that is successfully ...
    (comp.dcom.sys.cisco)
  • Re: New to ISA Server
    ... The best way to reconfigure the PIX in this scenario is to place it back ... The server should have 2 nic cards and can be a member server. ... Network with Windows 2003 Servers. ...
    (microsoft.public.isa)