1231G Bridge



Am tasked with setting up a temporary bridge with 2 1231G APs. Not too
familiar with configuration of these and can't seem to find any config
guides for setting up a simple bridge. Short range bridge config would
be (External Router - AP - Wireless - AP - Firewall - LAN)

It looks like it should be possible due to the comments from the cisco
site on these APs:

"In addition, when running Cisco IOS Software the Cisco Aironet 1200
Series supports link role flexibility which provides both access point
and bridge functionality through configuration of each radio as an
access point, repeater, root bridge, non-root bridge, or workgroup
bridge. "

But before I dive head-first into this, I want to make "sure" it is
possible and hopefully find a config guide for this.

Thanks!!

B

.



Relevant Pages

  • Re: Help a newbie :) (prob with for)
    ... config utility in bash script using grep, sed, dialog, etc. ... When 1 is selected scanf ("%d", Selection) - Selection is ... There you are asked the bridge name, IP, subnet, etc. ... script, there's still just a printf(Enabled eth%d", EthNr); ...
    (comp.os.linux.development.apps)
  • Re: Trying to connet to Telia(Skanova) ADSL provider in Sweden with 837
    ... >>These Cisco 837 Config Wizards may or may not help you: ... > interface ATM0 ... > ip nat outside ... > bridge 1 protocol ieee ...
    (comp.dcom.sys.cisco)
  • Help a newbie :) (prob with for)
    ... config utility in bash script using grep, sed, dialog, etc. ... When 1 is selected scanf ("%d", Selection) - Selection is ... There you are asked the bridge name, IP, subnet, etc. ... script, there's still just a printf(Enabled eth%d", EthNr); ...
    (comp.os.linux.development.apps)
  • Re: Xen 3.0.3 and VLAN
    ... Try using brctl to manually create the bridge, then pin the nic to the ... iface xenbr0 inet static ... the config file for the dom-u I can give you a hand with that too. ... The network-script that comes with Xen isn't the best to use in a colo ...
    (Debian-User)
  • Re: AP access hardware
    ... APs up a pole. ... then the one that's in client mode can do a discovery of ... >not just size) antenna for the bridge to talk to the other APs. ...
    (alt.internet.wireless)

Loading