PIX 501 VPN problem..
- From: Hank Zoeller <bogusaddress@xxxxxxxxxxxxxxxxxxxxxx>
- Date: Wed, 08 Feb 2006 18:57:47 -0700
Use ms-windows VPN client to connect to the outside interface of the PIX via a public, fixed, IP address. (Remote machine is 69.xxx.xxx.xxx, LAN is at 71.xxx.xxx.xxx).
Once the remote machine is authenticated on the VPN do 'ipconfig /all' and note that I have another IP address: 192.168.4.1 from the 'Alien' pool on the PIX. (Using PIX local authentication.)
From the remote machine attempt to map a drive on the LAN:
net use x: \\192.168.0.250\sharename
Get back:
"The network path was not found"
From the remote machine ping a machine on the internal LAN:
ping 192.168.0.250
Get back
"Request Timed Out"
From an internal LAN machine ping the remote machine using it's pool assigned IP address:
ping 192.168.4.1
Get back:
"Reply from 192.168.4.1: bytes=32 time=141ms TTL=128"
From an internal LAN machine attempt to map a drive on the remote machine:
net use x: \\192.168.4.1\sharename
The drive maps OK and I have read access but not write access.
That's nice but is back-asswords from what I'm trying to achieve. I want outside users to have access to LAN shares. Not LAN users accessing remote shares.
Issue the command: "show vpdn"
%No active L2TP tunnels
PPTP Tunnel and Session Information (Total tunnels=1 sessions=1)
Tunnel id 13, remote id is 13, 1 active sessions
Tunnel state is estabd, time since event change 39 secs
remote Internet Address 69.xxx.xxx.xxx, port 10033
Local Internet Address 192.168.3.2, port 1723
396 packets sent, 502 received, 47262 bytes sent, 261777 received
Call id 13 is up on tunnel id 13
Remote Internet Address is 69.xxx.xxx.xxx
Session username is haz, state is estabd
Time since event change 10282 secs, interface outside
Remote call id is 1000
PPP interface id is 1
396 packets sent, 502 received, 47262 bytes sent, 261777 received
Seq 397, Ack 553, Ack_Rcvd 396, peer RWS 64
23 out of order packets
%No active PPPoE tunnels
Get currently running configuration:
PIX Version 6.3(4)
interface ethernet0 auto
interface ethernet1 100full
nameif ethernet0 outside security0
nameif ethernet1 inside security100
enable password 3OQvc6UWCVetmyWL encrypted
passwd 3OQvc6UWCVetmyWL encrypted
hostname pixfirewall
domain-name ciscopix.com
fixup protocol dns maximum-length 512
fixup protocol ftp 21
fixup protocol h323 h225 1720
fixup protocol h323 ras 1718-1719
fixup protocol http 80
fixup protocol pptp 1723
fixup protocol rsh 514
fixup protocol rtsp 554
fixup protocol sip 5060
fixup protocol sip udp 5060
fixup protocol skinny 2000
fixup protocol smtp 25
fixup protocol sqlnet 1521
fixup protocol tftp 69
names
access-list msvpn permit ip any 192.168.0.0 255.255.255.0
access-list inside_outbound_nat0_acl permit ip any 192.168.4.0 255.255.255.0
pager lines 24
logging on
logging timestamp
logging trap informational
logging host inside 192.168.0.253
mtu outside 1500
mtu inside 1500
ip address outside dhcp setroute
ip address inside 192.168.0.1 255.255.255.0
ip audit info action alarm
ip audit attack action alarm
ip local pool Aliens 192.168.4.1-192.168.4.11
pdm location 192.168.0.250 255.255.255.255 inside
pdm location 192.168.0.254 255.255.255.255 inside
pdm location 192.168.0.253 255.255.255.255 inside
pdm location 192.168.4.0 255.255.255.240 outside
pdm logging informational 100
pdm history enable
arp timeout 14400
global (outside) 1 interface
nat (inside) 1 0.0.0.0 0.0.0.0 0 0
timeout xlate 0:05:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 rpc 0:10:00 h225 1:00:00
timeout h323 0:05:00 mgcp 0:05:00 sip 0:30:00 sip_media 0:02:00
timeout uauth 0:05:00 absolute
aaa-server TACACS+ protocol tacacs+
aaa-server TACACS+ max-failed-attempts 3
aaa-server TACACS+ deadtime 10
aaa-server RADIUS protocol radius
aaa-server RADIUS max-failed-attempts 3
aaa-server RADIUS deadtime 10
aaa-server LOCAL protocol local
http server enable
http 192.168.0.0 255.255.255.0 inside
no snmp-server location
no snmp-server contact
snmp-server community public
no snmp-server enable traps
floodguard enable
sysopt connection permit-pptp
telnet 192.168.0.0 255.255.255.0 inside
telnet timeout 5
ssh timeout 5
console timeout 0
vpdn group PPTP-VPDN-GROUP accept dialin pptp
vpdn group PPTP-VPDN-GROUP ppp authentication pap
vpdn group PPTP-VPDN-GROUP ppp authentication chap
vpdn group PPTP-VPDN-GROUP ppp authentication mschap
vpdn group PPTP-VPDN-GROUP ppp encryption mppe auto
vpdn group PPTP-VPDN-GROUP client configuration address local Aliens
vpdn group PPTP-VPDN-GROUP pptp echo 60
vpdn group PPTP-VPDN-GROUP client authentication local
vpdn username haz password *********
vpdn enable outside
dhcpd address 192.168.0.2-192.168.0.33 inside
dhcpd lease 3600
dhcpd ping_timeout 750
dhcpd auto_config outside
dhcpd enable inside
terminal width 80
Cryptochecksum:a12e181d68e425791bbe5c2877d429ad
: end
[OK]
I'm not sure how to proceed. I'm inclinded to issue a debug command or two but I'm not sure what I'm looking for yet. I don't see much of interest in the log (logging host is a Solaris machine) so I also think I need to adjust my logging level.
Any suggestions gratefully received!
--
HZ
.
- Follow-Ups:
- Re: PIX 501 VPN problem..
- From: Walter Roberson
- Re: PIX 501 VPN problem..
- From: Garrett
- Re: PIX 501 VPN problem..
- Prev by Date: Re: ISA server with cisco PIX
- Next by Date: Re: PIX 501 & VPN
- Previous by thread: MPLS or not ?
- Next by thread: Re: PIX 501 VPN problem..
- Index(es):
Relevant Pages
|
