Cannot find wan MAC address on 1812

Hi - I'm hoping someone can help - I'm new to Cisco routers - however am
familiar with other more advanced routers such as Sonicwalls.

I am using SDM and cannot find anywhere that lists the MAC or Physical
address of port: FastEthernet0.

I need the MAC address to register with our ISP

Thanx in advance,

Mark

PS - any info on how to clone our old router's mac address into our new 1812
would also help!


.

Relevant Pages

  • Re: Wireless Network in Public Places Options
    ... and implement a static bridging table. ... >> allows traffic to one other ethernet port, ... source MAC addresses. ... Packets with no destination addresses such as broadcasts and DHCP ...
    (microsoft.public.win2000.networking)
  • Re: Scan for "outsider" Pcs on network
    ... can use is the MAC address. ... switch ports by MAC address does not secure one's Ethernet network. ... switch port set up to only accept their mac address. ... OpenBSD Box (SOB) set up as a bridge.He drops it inline with the ...
    (Focus-IDS)
  • Re: Its War!
    ... they know which port is doing what. ... Once they have that MAC address, ... security seriously, they have tied your MAC address to you. ... log into the router for Internet, the mere fact that you can get ...
    (microsoft.public.windowsxp.general)
  • Re: port-security and IP Phones
    ... In fact the MAC address was still known on that port ... switchport port-security aging type inactivity ...
    (comp.dcom.sys.cisco)
  • Re: Mass storage device support in WM5
    ... This would mean that I could use it on my mac as ... I'd been using a usb1 port with a hub. ... If I turn off the Axim, ... I do NOT have Active sync installed on this machine. ...
    (microsoft.public.pocketpc)