Disconnect and reconnect ADSL on C827
- From: "Alni" <none@xxxxxxxxxxx>
- Date: Tue, 29 Nov 2005 12:01:13 +0100
Hi,
I wonder what's the best way to disconect, then reconnect to ISP on Cisco 827.
My ISP disconnects me after 24h uptime, then the cisco auto-reconnects me and it's fine. But I rather prefer to force the disconnect at a precise hour (6h00 while everybody sleeps) in order to avoid the 24h disconnect during day work.
I could have reboot the modem one time at 6 oc', then let the reconnect happens every day at this hour, but if for some reason there is a disco or power cut in the day, the next disco will happen in the day 24h after...
I actually use a telnet script (runs in "at" command from a W2k) that connects to the router, send login then send a "clear interface dialer1" and exits.
----------------------
LINK-3-UPDOWN: Interface Virtual-Access2, changed state to down
DIALER-6-UNBIND: Interface Vi2 unbound from profile Di1
LINK-3-UPDOWN: Interface Virtual-Access2, changed state to up
DIALER-6-BIND: Interface Vi2 bound to profile Di1
LINEPROTO-5-UPDOWN: Line protocol on Interface Virtual-Access2, changed state to down
LINEPROTO-5-UPDOWN: Line protocol on Interface Virtual-Access2, changed state to up
-------------
This do the job, the connection stops and the cisco reconnects immediatly within 10s, but is there a more clean way to to that ?
-- Alni
.
- Follow-Ups:
- Re: Disconnect and reconnect ADSL on C827
- From: anybody43
- Re: Disconnect and reconnect ADSL on C827
- Prev by Date: Cisco 1811: V.92 configuration
- Next by Date: Re: Disconnect and reconnect ADSL on C827
- Previous by thread: Cisco 1811: V.92 configuration
- Next by thread: Re: Disconnect and reconnect ADSL on C827
- Index(es):
Relevant Pages
|
