Re: Cisco 1750 Config...

I do not have anything connected to the Ethernet port right now. I am
just getting it set up throught the db9 cable. I want to be able the
ping out.

I will be getting a PIX515E for the firewall, but look at the post
above yours (we must have posted at the same time). I turned on nat and
ip route. The second config that i posted still does not allow me to
connect to ping 166.102.165.11 (dns server).

Please throw some more ideas.

Sorry for being a beginner.

Thanks
Jason

.

Relevant Pages

  • Ping doesnt pass thru Passthru
    ... I have a little problem with passing pings throught adapted passthru IM. ... the problem is that if ping try to resolve (target) IP to ... Send ARP Request ...
    (microsoft.public.development.device.drivers)
  • Re: Hacking a wireless router?
    ... >> always go out over the ethernet port? ... with very short blinks, but only immediately after the router is reset. ... the activity light stops and doesn't resume even for the "ping" command. ...
    (sci.electronics.design)
  • Re: Cisco 857 Ethernet0 wont stay up unless constant ping is done.
    ... Yesterday the ethernet port kept ... ping program run, ping -t 10.1.1.50, on a pc, the ethernet port would ... Once I stopped pinging the router the ethernet port would go ... current running config: ...
    (comp.dcom.sys.cisco)
  • Re: Hacking a wireless router?
    ... > always go out over the ethernet port? ... the ping goes out whichever interface is configured for that IP address. ... Prev by Date: ...
    (sci.electronics.design)
  • connecting to ntl thro router
    ... I've connected to NTL ... throught their cable modem via the Ethernet port. ...
    (uk.telecom.broadband)