Re: E1 connection
- From: "Gary" <gshine@xxxxxxxxxxxx>
- Date: Sat, 26 Nov 2005 00:54:58 -0500
or a WIC-1MFT-G703
Gary
"Matty M" <me@xxxxxxxx> wrote in message
news:8fOhf.15746$Lw5.11757@xxxxxxxxxxxxxxxxxxxxxxxxxxxxx
>
> "Robert" <robert@xxxxxxxxxx> wrote in message
> news:bNNhf.3130$xP2.2521@xxxxxxxxxxxxxxxxxxxxxxx
>> Hello
>> We are changing ISP
>> New ISP did provide RJ45 to our office
>> After 2 days someon called me and said that is not Ethernet connection -
>> it is E1 (G.703) Connection
>>
>> I hav router 3640 wirf FE -PRI interface (1FE-2CE1-B/U) 2 CTRLR and
>> FastEthernet interfaces
>>
>> wan network settings (xxx.xxx.xxx.aaa - xxx.xxx.xxx=fake aaa=real)
>> Both WAN and LAN are PUBLIC
>> ISP provided some informations
>>
>> WAN settings
>> Wan network: 80.80.80.156
>> WAN interface: 80.80.80.158
>> WAN remote: 80.80.80.157
>> WAN subnet mask 255.255.255.252
>>
>> Lan Settings
>> LAN network: 80.80.73.16
>> Lan Gateway: 80.80.73.17
>> 1st usable IP: 80.80.73.18
>> Last usable IP: 80.80.73.31
>> network mask: 255.255.255.240
>>
>> Question is
>> Is this Interface is Correct? can I use FE-PRI
>> How to configure this interface if Yes?
>>
>> Thank You
>> Robert
>>
>>
>
> Hi,
>
> The CE devices are for ISDN. I think although not 100% sure you need
> something like this -
>
> http://www.cisco.com/en/US/products/hw/routers/ps259/products_data_sheet09186a0080091b9c.html
>
> or buy a G.703 to X21 convertor and plug a WIC1T into the 3640.
>
> Cheers
>
> Matt
>
.
- References:
- E1 connection
- From: Robert
- Re: E1 connection
- From: Matty M
- E1 connection
- Prev by Date: Re: Cisco 2620 problem
- Next by Date: Eigrp update packet
- Previous by thread: Re: E1 connection
- Next by thread: SDM install on 1760 - broken RCP?
- Index(es):
Relevant Pages
|
