Re: Many 802.1q tagged vlans, 1 Cisco 2621 router

Let me clarify a couple of points too. The switches are NOT cisco (no
ISL) but do support 802.1q tagging. I basically want the FE ports on
the router to allow any traffic no matter want tagged VLAN they are
coming from and all hosts and VLANs talking to FE0/0 are coming from
the same IP subnet, and likewise all hosts and VLANs talking to FE0/1
are coming from their own subnet.

Is this possible? I have IOS Version 12.2(31) w/feature set IP/Plus. I
don't need to have one VLAN to be able to talk to another VLAN, at
least not right now, I am more in need of getting the VLANs to be able
to talk to the internet. Ideally I would like to use different more
capable switches, but that is not a possibility right now.

.

Relevant Pages

  • Re: Best solution to segment subnets
    ... Foundry Networks 2402CF switches awasome models, ... ADSL router ... multiple connected managed switches is configured for a separate VLAN. ...
    (microsoft.public.win2000.ras_routing)
  • Re: Single domain two IP subnets
    ... Only layer-3 switches do both. ... thus to move traffic from one VLAN to another is a ROUTING ... there are switches that do both. ... Layer-2 managed switch on each dependent subnet, ...
    (microsoft.public.win2000.dns)
  • Re: arp-proxy
    ... >> If I was to subnet these addresses so that all the sustomers would get ... Multiple customers could share a VLAN ... Packetfront's ASR line of layer 3 switches ...
    (freebsd-net)
  • Re: Configuring Cisco IPS High Bandwidth Using EtherChannel Load Balancing
    ... VLAN Pair mode uses one interface only and this is the only supported ... The ECLB feature allows you to load balance upto eight Cisco IPS ... All ports will be part of the same etherchannel ... All servers are connected to the backbone switches via another ...
    (Focus-IDS)
  • Re: Best solution to segment subnets
    ... Subnet A 192.168.1.0 ... This is not a real easy problem if your ADSL router will only listen to 192.168.0.0/24. ... Each port on a managed layer-2 switch or multiple connected managed switches is configured for a separate VLAN. ...
    (microsoft.public.win2000.ras_routing)
Loading