I have a PIX 501.
inside network = 192.168.1.0 255.255.255.0.
I need to create a site to site IPSEC VPN through the external
interface.
on the remote side, there's already a LAN with 192.168.1.0, so they
asked me to configure an internal NAT in my system so that when my
192.168.1.101 tries to contact a peer on the remote side, he will be
identified as 192.168.48.49.
Re: VPN connection works, lan access fails ... The extra IP you see is indeed the internal interface....first remote user connects, the internal interface acquires an IP address. ... > from the PPTP daemon virtual IP to the physical. ... From the inside LAN I can ping the SBS static IP, ... (microsoft.public.win2000.ras_routing)
LAN interface/control project ... interface/connect some kind of control machines via LAN.... I think remote log... mainly from industrial controls and sensors ... I would like to be able to interface with sw and fw ... (comp.arch.embedded)
Re: Remote Desktop to Other PC systems on the Network from Remote ... Do I need to have the external interface of the PIX at Branch side somewhere ... Sorry ..Yes my 1720 has an internal interface on the LAN.... I have added the remote network ranges to the "Internal" network definition ... I also already have 2 persistent routes these identify ... (microsoft.public.isaserver)
site to site vpn with internal NAT ... I need to create a site to site IPSEC VPN through the external ...interface.... on the remote side, there's already a LAN with 192.168.1.0, so they ... tries to contact a peer on the remote side, ... (comp.dcom.sys.cisco)
Re: integrate a ppp-connected PC to my LAN. arp problem? ... The interface is to the remote PC is: ... But trying to connect to my LAN by DSL by ssh tunnel from somewhat else, I can't reach the PC that is connected by ppp. ... (comp.os.linux.networking)
