Startup Config has me stumped
- From: james.a.bailey@xxxxxxxxx
- Date: 31 Oct 2005 06:41:02 -0800
Can anyone see any reason why the below configuration won't work
correctly? I thought it was the configuration I used fine for a week
but when I came in one morning all the ports were in stealth mode
instead of open. I can't seem to figure out the problem.
I changed the outside IP Addresses for the sake of security.
Thanks!!
Infotech
Building configuration...
: Saved
:
PIX Version 6.3(5)
interface ethernet0 auto
interface ethernet1 100full
nameif ethernet0 outside security0
nameif ethernet1 inside security100
enable password etqreMPNyt0AvaUj encrypted
passwd etqreMPNyt0AvaUj encrypted
hostname pixfirewall
domain-name ciscopix.com
fixup protocol dns maximum-length 512
fixup protocol ftp 21
fixup protocol h323 h225 1720
fixup protocol h323 ras 1718-1719
fixup protocol http 80
fixup protocol rsh 514
fixup protocol rtsp 554
fixup protocol sip 5060
fixup protocol sip udp 5060
fixup protocol skinny 2000
no fixup protocol smtp 25
fixup protocol sqlnet 1521
fixup protocol tftp 69
names
object-group service sbs tcp
port-object eq www
port-object range domain domain
port-object eq https
port-object eq smtp
port-object range 3389 3389
port-object eq pop3
port-object eq pptp
object-group service airtimeserv tcp
port-object range 3389 3389
access-list outside_in permit icmp any any
access-list inside_outbound_nat0_acl permit ip any 192.168.16.0
255.255.255.0
pager lines 24
mtu outside 1500
mtu inside 1500
ip address outside 192.168.0.2 255.255.255.248
ip address inside 192.168.16.1 255.255.255.0
ip audit info action alarm
ip audit attack action alarm
pdm location 192.168.16.0 255.255.255.0 inside
pdm location 192.168.1.0 255.255.255.0 inside
pdm location 192.168.16.2 255.255.255.255 inside
pdm location 192.168.0.0 255.255.0.0 inside
pdm location 192.168.16.3 255.255.255.255 inside
pdm logging informational 100
pdm history enable
arp timeout 14400
global (outside) 1 interface
nat (inside) 1 0.0.0.0 0.0.0.0 0 0
static (inside,outside) 192.168.0.3 192.168.16.2 netmask
255.255.255.255 0 0
static (inside,outside) 192.168.0.4 192.168.16.3 netmask
255.255.255.255 0 0
conduit permit tcp host 192.168.0.5 object-group sbs any
conduit permit tcp host 192.168.0.6 object-group airtimeserv any
route outside 0.0.0.0 0.0.0.0 192.168.0.1 1
route inside 192.168.0.0 255.255.0.0 69.15.203.154 1
timeout xlate 0:05:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 rpc 0:10:00 h225
1:00:00
timeout h323 0:05:00 mgcp 0:05:00 sip 0:30:00 sip_media 0:02:00
timeout sip-disconnect 0:02:00 sip-invite 0:03:00
timeout uauth 0:05:00 absolute
aaa-server TACACS+ protocol tacacs+
aaa-server TACACS+ max-failed-attempts 3
aaa-server TACACS+ deadtime 10
aaa-server RADIUS protocol radius
aaa-server RADIUS max-failed-attempts 3
aaa-server RADIUS deadtime 10
aaa-server LOCAL protocol local
http server enable
http 192.168.1.0 255.255.255.0 inside
http 192.168.16.0 255.255.255.0 inside
no snmp-server location
no snmp-server contact
snmp-server community public
no snmp-server enable traps
tftp-server inside 192.168.16.38 \tftp-root
floodguard enable
telnet 192.168.16.0 255.255.255.0 inside
telnet timeout 10
ssh timeout 5
console timeout 0
terminal width 80
Cryptochecksum:08022323919c5c99cfdf0aa54b2275df
[OK]
.
- Prev by Date: Re: Loopback and VLANS
- Next by Date: resetting just one isakmp
- Previous by thread: Re: Network traffic problem ---- packet loss
- Next by thread: Re: Startup Config has me stumped
- Index(es):
Relevant Pages
|
