Re: how to check QOS implementation???
- From: "Igor Mamuzic" <no@xxxxxxx>
- Date: Sun, 30 Oct 2005 13:40:37 +0100
You didn't specified whether you implemented QoS on Cisco router or switch,
so I will assume that this is about router:
Bring the egress interface's load to it's max (or up to the traffic shaping
value if any configured) and then execute IP SLA monitor probe...
After that, remove QoS policy-map from that interface and then load the link
again and measure parameters using Cisco IP SLA, so that you can simply
compare IP SLA results you get with and without QoS.
For more info about Cisco IP SLA, please visit:
http://www.cisco.com/en/US/products/ps6350/products_configuration_guide_book09186a008043be2d.html
It's for IOS 12.4T and for earlier IOS releases (12.3T) you need to look
for Cisco SAA probes, but rather then do that I recommend IOS upgrade,
because I found my self hassling to find SAA documentation on Cisco site...
B.R.
Igor
"Rave" <ravi.parmar@xxxxxxxxx> wrote in message
news:1130643132.727463.57700@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
> hi all..
>
> i have implemented qos for telnet traffic i.e. telent traffic use 32
> kbps of guaranteed bandwith...
>
> i want to know how can i check this implementation...
>
.
- Follow-Ups:
- Re: how to check QOS implementation???
- From: Rex Johnson
- Re: how to check QOS implementation???
- Prev by Date: Re: 877W - cannot talk wireless device to wireless device
- Next by Date: Re: Please help with Pix 501
- Previous by thread: 877W - cannot talk wireless device to wireless device
- Next by thread: Re: how to check QOS implementation???
- Index(es):
Relevant Pages
|
