Re: understanding native VLAN
Excellent, thanks. I wish I had a better idea of how things work on
their side. It seems fairly simple - they have about 6 buildings per
ring with a tiny little Cisco 35xx in each building. They pull the
fiber to the switch in each building and the GigE (or 10GigE?) loop
actually goes into then out of each switch. But I'm not sure what gear
they use to aggregate everything. They do allow me to get a vlan out
to any port in any building, so I guess we'll just see what happens
when the next vlan gets turned up.
.
Relevant Pages
- Re: Strannge situation with two SRW224G4 and one Cisco 2950-12
... doesn't mean the vlan has been created. ... The em1 card of the BSD is connected into trunk port g3 of the first ... LinkSys SRW224G4 switch as described at scheme. ... So I suspect that problem is in Cisco switch configuration or IOS. ...
(comp.dcom.sys.cisco) - Re: 470-48T switches can I do this?
... My fibers are going into the core, one is on the 172.16.x.x vlan while ... All MLT port members must be ... those that are used on the core switch. ...
(comp.dcom.sys.nortel) - Re: Restart: VLAN question...
... Configure all ports except the Domain Controller as PVE ... Configure the Domain Controller port as the uplink ... you do the same thing on the Internet switch. ... PVE's are used between like switches to extend your VLAN topology across ...
(comp.dcom.lans.ethernet) - Strannge situation with two SRW224G4 and one Cisco 2950-12
... LinkSys SRW224G4 switch as described at scheme. ... forwarding via another trunk port to second SRW224G4 and then to Cisco ... vlan40 is described in VLAN DB of all three switches. ... So I suspect that problem is in Cisco switch configuration or IOS. ...
(comp.dcom.sys.cisco) - Re: 470-48T switches can I do this?
... My fibers are going into the core, one is on the 172.16.x.x vlan while ... All MLT port members must be ... those that are used on the core switch. ...
(comp.dcom.sys.nortel) |
|
