Re: Cisco IOS Firewall Software

Hi,

IIRC all 831s have firewall software.

It can be quite a daunting task to find out exactly what features a
router has even for experienced personnel. In many cases it is easiest
just to try out the command and see if the router accepts the command.

.

Relevant Pages

  • RE: Strange authentication attempts
    ... I make this assumption based on the command syntax of the embedded OS ... Essentially, if the router was configured with no admin password, ... This is also the case for the Cayman OS: ...
    (Incidents)
  • Re: Page Cannot Be Displayed
    ... You did not answer my Q about if the Router is Firewall Built one and if you ... Ping statistics for 192.168.0.1: ... Step1: Then Try this Start The RUN Command and type in the following: ... and look for the DNS Server is there is any thing in front of it like Enable ...
    (microsoft.public.windows.inetexplorer.ie6.browser)
  • Re: Win XP no longer able to access LAN with win 98SE machines
    ... >the other router which is wireless and acts as a router for the other two PC ... damage that is almost impossible to repair. ... a repair installation of Windows XP, ... the command: netsh int ip reset ...
    (microsoft.public.windowsxp.network_web)
  • Re: RWW Issue From the Internet (Port 4125)
    ... At a command prompt, if the following does not return a result, it should ... Port 4125 has to be open in your routers, ... then try to RWW into the SBS server. ... This will take the router ...
    (microsoft.public.windows.server.sbs)
  • Re: telnet from spawned telnet process
    ... Thanks for the response. ... the 'od' command does not exist on windows. ... My thinking woud have been that the telnet from the router was not ...
    (comp.lang.tcl)