On Mon, 29 Aug 2005 16:27:08 +0200, Wim Holemans wrote:
> Does anyone knows if i can disable STP on the vlan connecting router
> and FWSM module in a 65xx ? It seems that spanning-tree is enable by
> default on this vlan and we are trying to minimize the number of STP
> instances on our router.
You can do it with;
s1(config)#no spanning-tree vlan ?
WORD vlan range, example: 1,3-5,7,9-11
Re: strange STP behaviour : stack port in "sh spanning-tree" output ... I had to reconfigure "spanning-tree vlan 242-243" on the master to align configs... ... I have three 3750 switch connected in stack ... ... Issuing "sh spanning-tree root port" only for VLAN 242 and 243 you can ... (comp.dcom.sys.cisco)
Understanding spanning-Tree ... I would ask something about spanning-tree, as I'm not expert to it and I'm ... talking about a switched LAN running more than ... one VLAN, where every switch partecipate in spanning tree. ... every packet sent by a host in that VLAN must pass through the root bridge... (comp.dcom.sys.cisco)
Re: Understanding spanning-Tree ... I would ask something about spanning-tree, as I'm not expert to it and I'm ... than one VLAN, where every switch partecipate in spanning tree. ... every packet sent by a host in that VLAN must pass through the root bridge... (comp.dcom.sys.cisco)
Re: Understanding spanning-Tree ... I would ask something about spanning-tree, as I'm not expert to it and I'm ... one VLAN, where every switch partecipate in spanning tree. ... every packet sent by a host in that VLAN must pass through the root bridge... I all above is true, if I have 2 communicating hosts on one side of the LAN, ... (comp.dcom.sys.cisco)
Re: VLAN Basics ... same switch in fa 0/17 which is configured for VLAN 5, ...spanning-tree loopguard default ...switchport trunk pruning vlan none ... When you designate a port as a trunk ... (comp.dcom.sys.cisco)
