3550-EMI crashs with PIM on VLAN

I wonder if the 3550er is able to work as a multicast router on a vlan.
The C3550-I5Q3L2-M (Version 12.1(13)EA1c) image crashs with
"Unassigned Exception (0xAC1B1C48)!, PC 0x21EE74"

Relevant config:
interface f0/X
description Customer port
switchport
switchport mode access
switchport access vlan Y
!
interface f0/V
description IPv6 router
switchport
switchport mode trunk
switchport trunk allowed vlan Y,...
!
interface vlan Y
ip address 192.168.0.1/30
ip pim
ip sap listen
!

It worked fine with f0/X as a router port (without vlan), but the vlan was
necessary to provide IPv6 to the customer. The IPv6 router is v6 only.

Any idea? Should I disable IGMP snooping on the vlan Y?
.

Relevant Pages

  • Need help adding device to new vlan
    ... The vlan 99 ... - If I assign an ip address to the vlan 199 interface, ... switchport trunk allowed vlan 40,51,99,199,997,998 ... no ip proxy-arp ...
    (comp.dcom.sys.cisco)
  • Re: Need help adding device to new vlan
    ... The vlan 99 ... - If I assign an ip address to the vlan 199 interface, ... switchport trunk encapsulation dot1q ... switchport trunk allowed vlan 40,51,99,199,997,998 ...
    (comp.dcom.sys.cisco)
  • Re: 2600 router + 2924 switch and vlans
    ... I can route from a port ... assigned to the def vlan, but not from any port assigned to vlan 2 ... interface FastEthernet0/0 ... switchport trunk encapsulation isl ...
    (comp.dcom.sys.cisco)
  • cant ping or telnet to or from a cat 3550
    ... seems to be switching and routing just fine but I can't seem to ping to ... Switchport: Enabled ... Trunking Native Mode VLAN: 1 ... interface FastEthernet0/1 ...
    (comp.dcom.sys.cisco)
  • Re: Need Help with IP Addressing
    ... I see Walter answered the native vlan Q so i'll take this ... Floor 1 switchport trunk allowed vlan 2,101 ... What is the purpose of the "vlan for the native vlan of trunk ports"? ...
    (comp.dcom.sys.cisco)