Re: PIX 501 CISCO vpn problem
- From: roberson@xxxxxxxxxxxxxxxxxx (Walter Roberson)
- Date: Wed, 24 Aug 2005 19:16:28 +0000 (UTC)
In article <Vz1Pe.238884$on1.814@clgrps13>, Travis <nospam@xxxxxxxxxx> wrote:
:I used the VPN wizard to setup the CISCO vpn, but I'm having problems
:connecting to it. I can ping the external ip address no problem. But when I
:try to connect, it just sits there. I can remember entering in some kind of
:command on my pix 506e that allowed port 4500 or somthing.
How are you trying to connect to it? Are you trying to connect through
a VPN client to the remote PIX 501 itself? Are you trying to
connect through a VPN client to a device -behind- the PIX 501?
Have you set up a site-to-site VPN between the 506E and the 501?
Did you have the 501 create an RSA public key (and save it), and
configured ssh access to the 501 and tried ssh'ing to it? Have you
tried connecting to the 501 via pdm? Have you configured
isakmp nat-traversal 20 on the 506E and 501? What relevant
log messages are you seeing on the 501 end?
--
Entropy is the logarithm of probability -- Boltzmann
.
- Follow-Ups:
- Re: PIX 501 CISCO vpn problem
- From: Travis
- Re: PIX 501 CISCO vpn problem
- References:
- PIX 501 CISCO vpn problem
- From: Travis
- PIX 501 CISCO vpn problem
- Prev by Date: Re: CSS 11501 - How do I blow away the config and start over?
- Next by Date: Re: Load Balancing NxSTM1s
- Previous by thread: PIX 501 CISCO vpn problem
- Next by thread: Re: PIX 501 CISCO vpn problem
- Index(es):
Relevant Pages
|
