Re: VPN tp VPN via PIX

Tom ,

This is not possible if both the tunnels are terminating on same
interface of Hub PIX .
As the PIX being firewall doesn't redirect traffic on the same
interface .

Had the hub device was router this would work or the tunnels were
terminating on different interfaces on the PIX this would also work .

SH

.

Relevant Pages

  • Re: Interesting problem with pix 515 UR
    ... Consider diabling Proxy arp on inside interface. ... This pix have only 2 ethernet interfaces; i have connected the ethernet0via a cross cable ... fixup protocol dns maximum-length 512 ... ntp server 194.100.206.70 source outside ...
    (comp.dcom.sys.cisco)
  • Interesting problem with pix 515 UR
    ... This pix have only 2 ethernet interfaces; i have connected the ethernet0via a cross cable ... interface FastEthernet0/21 ... fixup protocol dns maximum-length 512 ... ntp server 194.100.206.70 source outside ...
    (comp.dcom.sys.cisco)
  • Re: One internal network, VPN, 2 PIX
    ... all I can ping is the internal interface on the PIX that I'm VPN'ing in to. ... Do I need to add ACL's into the Corp PIX to allow the VPN traffic (I already ... the 192.168.200.* inside hosts, the inside hosts are going to ... so the interior hosts send responses to the 501); ...
    (comp.dcom.sys.cisco)
  • [fw-wiz] Double firewall setup (long)
    ... One PIX 515E w/ 3 interfaces: inside, outside, DMZ. ... access-list OUTB permit tcp 10.181.8.0 255.255.248.0 any eq www ... interface ethernet0 auto ...
    (Firewall-Wizards)
  • Re: Cisco PIX 501: Cant ping global IP-Adress from NATed IP
    ... on the 'static' statement for the server, add the 'dns' keyword. ... The catch is that the two interfaces cannot have the same IP subnet, ... of the external interface. ... then the PIX wouldn't know which interface to send it towards. ...
    (comp.dcom.sys.cisco)