Re: xerox copycentre 232 dialing problem

In article <1190212624.562562.81480@xxxxxxxxxxxxxxxxxxxxxxxxxxxx>,
edogwv@xxxxxxxxx wrote:

It appears to be a bad modem card but xerox technicians have
supposively replaced the modem already.

Before, when the xerox tech was called to the scene... You could hear
the modem dialing but throughout the tone of the numbers the dialtone
continued.... Now it is able to call locally but unable to dial all
the numbers entered through a "quick dial" method

Ed-

Your automated voice system may be reducing the level of touchtones from
the modem. The replacement card probably has higher-level tones. It
now works for in-plant calls but the tone level is still not high enough
to activate the tone detectors when making an outside call.

Unless the modem has a level adjustment for outgoing tones, you can keep
replacing it until you get one with sufficient level for your
switchboard and/or phone company.

Fred
.

Relevant Pages

  • Re: Fax is pending, sent before
    ... You don't indicate if you could hear the relay click when the modem went off hook, dial tones or touch tone sounds from the computer speaker or a mini speaker on the modem board. ... When modem is "on hook" the two jacks are connected to each other, allowing you to hear a dial tone or talk on a phone attached to the modem. ... This allows multiple area codes in your toll free calling area and frees up a few more number combinations for exchanges to accommodate additional customers in each area code. ...
    (microsoft.public.windowsxp.print_fax)
  • Re: History AT&T early modem developments? [telecom]
    ... The TWX version of the ... ringing, busy tone, reorder, connected, etc. ... ever developed a modem that could reliably recognize all these conditions. ... Concerning time sharing, a lot of the early time sharing systems were ...
    (comp.dcom.telecom)
  • Re: No Dialtone when send/receive fax
    ... I'd followed your suggestion and swapped the line/phone cables connection. ... I purchased a USB modem for diagnostics of just ... em can't detect tone then, ... Apparently a relay disconnects the telephone jack when the modem ...
    (microsoft.public.windowsxp.print_fax)
  • Re: No Dialtone when send/receive fax
    ... view log>"review the modem response log for error". ... That means that my tone was detectable, ... cycle that modem's initialization, it would not longer ... terminates your dial up ISP connection up and establishes a new data ...
    (microsoft.public.windowsxp.print_fax)
  • Re: modem dials, but dial tone is still there like it never dialed
    ... What you describe would indicate that the phone system is not "hearing" the "tones" generated by the modem so perhaps "pulse" would work. ... I would be able to hear the dial tone ... It's just it dials and then ... ...
    (microsoft.public.windowsxp.general)