Re: Howto on Cable Modem Connection

From: John Jones <jjetroit000@xxxxxxxxxxxxx>
Date: Tue, 07 Mar 2006 11:58:52 GMT

On Sat, 11 Feb 2006 10:47:38 -0700, Quaoar <quaoar@xxxxxxxxxxxxxxx>
wrote:

Access the cable modem statistics page at 192.168.100.1 and check signal
to noise ratios and signal levels. The cable modem faq at
www.dslreports.com will provide the basis for determining if there are
line quality issues from the signal levels.

Finally had a chance Sunday to do this. Stats are:

Downstream
SNR: 36 dB
Power Level: -1 dBmV

Upstream
Power Level: 56 dBmV

According to the FAQ, only the Upstream Power Level number looks bad.
Guess I'll start looking for the right kind of splitter to feed the
cable modem, and do some rewiring.
John Jones, Detroit
.

Follow-Ups:
- Re: Howto on Cable Modem Connection
  - From: Quaoar

Prev by Date: Odd cable modem issue
Next by Date: Re: Comcast DHCP renewal problem?
Previous by thread: Odd cable modem issue
Next by thread: Re: Howto on Cable Modem Connection
Index(es):
- Date
- Thread

Relevant Pages

Re: Howto on Cable Modem Connection
... The cable modem faq at www.dslreports.com will provide the basis for determining if there are line quality issues from the signal levels. ... Power Level: -1 dBmV ...
(comp.dcom.modems.cable)
Re: Cable download speeds
... interface to check signal levels and so on. ... cable modem gets the best signal. ... Older splitters often have a lowest operating frequency of around ... The cable modem uplink signal is ...
(alt.os.linux.suse)