Re: Advice on Switching to Switches

The example below is not real but just a scenario

I have a 10BaseT network with hubs that have 8 ports. I have around 100

workstations that all connect to a single server. I want to switch my
hubs to 10Mbps symmetric switches but was told this was not a good
idea. Can anyone tell me why? Any help would be greatly appreciated.

So Why isn' t it a good idea?

Cheers ^_^

.

Relevant Pages

  • HELP!!!!
    ... I have a 10BaseT network with hubs that have 8 ports. ... workstations that all connect to a single server. ... hubs to 10Mbps symmetric switches but was told this was not a good ...
    (comp.dcom.lans.misc)
  • Re: ASUS and its strange USB behaviour
    ... Sometimes I'd plug a device in a port and some other USB device (like ... Furthermore, I have 8 physical ports (four 2-port hubs), but the device ... is "logic blocks" present in hardware. ...
    (alt.comp.periphs.mainboard.asus)
  • Re: Multiswitch
    ... "Stefan Herbert Tiran schrieb ... wie das kaskadieren funktioniert! ... > nur von Hubs und da hab' ich bei zwei verbundenen Hubs mit je 8 Ports ...
    (de.rec.tv.technik)
  • Re: # of USB ports
    ... USB hubs to expand the number of connectors. ... Can I do the 127-thing on *each* of my two physical laptop USB ports, ... "USB host may have multiple host controllers and each host ...
    (microsoft.public.windowsxp.hardware)
  • Re: # of USB ports
    ... USB supports up to 127 peripheral devices which can be connected with USB ... hubs to expand the number of connectors. ... Can I do the 127-thing on *each* of my two physical laptop USB ports, ... "USB host may have multiple host controllers and each host ...
    (microsoft.public.windowsxp.hardware)