I am now looking for a very small ethernet switch that would help me
with this task. I need a single SFP for uplink and preferably just a
few 10/100 ports. Space is an issue for this application. Anything
with more than eight ports is too large.
Re: Is what I need called a switch? ... Plug the long cable into the uplink... These are wired differently to the standard ports, with the transmit and receive lines swapped over. ... Sometimes there's one port with a switch that swaps the connections over, or one of the internal ports is connected to two sockets - one connected as a normal port the other as an uplink. ... (uk.comp.homebuilt)
Re: Restart: VLAN question... ... "Wastes" 2 ports but buys you more server ports. ... As I had no luck using *one box* with PVE ports 1-7 with 8 as uplink to the domain controller and 9-15 with 16 as uplink to the internet firewall. ... the first one with PVE ports 1-10 with 16 as uplink to the domain controller and the second box using ports 1-10 with 16 as uplink to the internet firewall.... (comp.dcom.lans.ethernet)
Re: another uplink to firewall ... You just configure both ports exactly the same - same VLAN, ... firewall will not send anything on it's LAN ports until primary fails,... another fiber uplink from this switch to a standby firewall incase one ... firewall fails it will use the second uplink.... (comp.dcom.sys.cisco)
Re: Home Hubs ... Sure you can connect the hubs.... If you connect uplink to uplink, ... Netgear FR114P router/firewall/print server for my home network.....inow ... that all the ethernet ports are used, I find that I need, at least, a couple ... (microsoft.public.win2000.networking)
Re: FC 2 Download ... 3 B/s down - 0 B/s up ...totals: 272.56M2 down - 594.5 MB up ... That 594.5 MB means I have uplink ports right? ... (Fedora)
