CAPI and analogue modem

Hi all,
i am trying to write a application that answers an incomming call. The
remote site is a modem using v.23 hdx 1200 with Takt and
SYNC.-Wechsel.( l read the setting directly from the pannel of that
modem).
Now my problem is: my application has only got a DATA_B3_IND then
followed with DISCONNECT_B3 IND (cause:clearing according to protocol).
the DATA_B3_IND comes in 10 seconds later after CONNECT_ACTIVE IND and
CONNECT_ACTIVE RESP is done.

l have tried many combination of B protocol:
e.g
B1=7,B2=7,B3=7
or
B1=8,B2=1,B3=7

but the result is always the same...
can any body help me at that point ?? my isdn card is a eicon pri-cti.
it shoud support v.23

Thanks

.

Relevant Pages

  • Problem with DATA_B3_IND
    ... remote site is a modem using v.23 hdx 1200 with Takt and ... followed with DISCONNECT_B3 IND (cause:clearing according to protocol). ...
    (comp.dcom.isdn.capi)
  • Re: Looking for file transfer tool with XMODEM on Linux
    ... I am looking for a simple solution for receiving files with the XMODEM ... protocol with a conventional V.32bis Modem on Linux. ... The remote modem is a GSM modem sending with 9.6 kbps. ...
    (comp.os.linux.misc)
  • Re: Netgear Router settings ?
    ... (Point to Point Protocol over Ethernet) ... I thought that strange as well but there is no PPPoA option ?? ... The WGT624 is a WiFi *Router*, which doesn't have an ADSL Modem in it - ...
    (uk.people.silversurfers)
  • Re: New virus - VERY DANGEROUS!
    ... | with cable modems and, like Gaby, I thought a cable modem was similar ... Point Protocol to assign an IP address and pass TCP/IP communications along the now ... With Cable and DSL modems the modems already are using ... network protocols to pass along the transmision line. ...
    (alt.comp.anti-virus)
  • Re: RH8 - dial-up modem network setup trouble
    ... --> Initializing modem. ... ppp0 Link encap:Point-to-Point Protocol ... ppp1 Link encap:Point-to-Point Protocol ... Any suggestion for what I ...
    (comp.os.linux.networking)