Re: Need telephone cable installation troubleshooting advice
- From: Ed Nielsen <egnlsn@xxxxxxxxxxx>
- Date: Mon, 31 Oct 2005 07:47:32 -0700
Is it a split block, in which case you will need bridge clips?
CIAO!
Ed N.
albundy@xxxxxxxxxxx wrote:
I have 3 telephone numbers coming into my small retail store. They come in to the left side of a distribution block. I had no trouble wiring two outlets by attaching the matching colored wire to the posts in the center of the block. When I tried to run a 3rd outlet using the same style, except on the right posts, it came up totally dead: no signal whatsoever. I then checked the cable thoroughly finding no problems and then ran a short test cable from the block to the jack and it also came up dead. I also tested by hooking directly to the incoming posts. Also dead.
Is there a voltage limit that I have exceeded? Am i missing something? I have double checked the color matches and they are fine.
Any help be appreciated. Thank you.
.
- References:
- Need telephone cable installation troubleshooting advice
- From: albundy
- Need telephone cable installation troubleshooting advice
- Prev by Date: Re: Need telephone cable installation troubleshooting advice
- Previous by thread: Re: Need telephone cable installation troubleshooting advice
- Index(es):
Relevant Pages
|
|