[Info-ingres] RE: Info-ingres digest, Vol 1 #374 - 1 msg
- From: "Newlands, Graham" <Graham.Newlands@xxxxxxxxxxxxxx>
- Date: Fri, 14 Oct 2005 10:42:33 +1000
Hi,
With regards to installing ingres patches on windows I've had the same
issues but have resolved by doing the following :
- Make sure IVM is not running
- Make sure no ingres processes are running
- Shutdown the following services:
IIS
WMI
COM+
SNMP
The only one I couldn't get round recently was the slow_v4.mnx being
accessed by another program. I chose to ignore that warning and
everything was fine. The slow_v4.mnx file is read by IVM which was
shutdown so I didn't see it as a problem. The only other thing that I
could think of that was accessing this file was the ingres performance
counters. With this being the only problem the patch installed ok with
no reported issues.
The patching we've done is on Advantage Ingres 2.6 running windows 2000
server...we're at patch level 10797
Hope this helps...
Best Regards
Graham T Newlands
IT Consultant
Fujitsu Australia
Address:
Lvl 20, 222 Exhibition St, Melbourne, VIC 3000
Tel:
+61 3 9657 8705
Mobile:
0404 003 104
Fax:
+61 3 9664 6570
Email:
graham.newlands@xxxxxxxxxxxxxx
Web site:
http://au.fujitsu.com
-----Original Message-----
From: info-ingres-admin@xxxxxxxxxxxxxxx
[mailto:info-ingres-admin@xxxxxxxxxxxxxxx] On Behalf Of
info-ingres-request@xxxxxxxxxxxxxxx
Sent: Friday, 14 October 2005 3:00 AM
To: info-ingres@xxxxxxxxxxxxxxx
Subject: Info-ingres digest, Vol 1 #374 - 1 msg
Send Info-ingres mailing list submissions to
info-ingres@xxxxxxxxxxxxxxx
To subscribe or unsubscribe via the World Wide Web, visit
http://mailman.cariboulake.com/mailman/listinfo.py/info-ingres
or, via email, send a message with subject or body 'help' to
info-ingres-request@xxxxxxxxxxxxxxx
You can reach the person managing the list at
info-ingres-admin@xxxxxxxxxxxxxxx
When replying, please edit your Subject line so it is more specific than
"Re: Contents of Info-ingres digest..."
Today's Topics:
1. FW: Patch install - DLLs in use (Paul White)
--__--__--
Message: 1
Date: Thu, 13 Oct 2005 23:40:15 +1000
From: "Paul White" <pwhite@xxxxxxxxxxxxxxxxx>
To: <info-ingres@xxxxxxxxxxxxxxx>
Reply-To: <pwhite_nospam@xxxxxxxxxxxxxxxxxxxxxxxx>
Subject: [Info-ingres] FW: Patch install - DLLs in use
Can anyone confirm if this happens in R3?
Paul writes....
Hi Justin,
I never did get to the bottom of it. The problem is not restricted to
Terminal server. It also happens on Win2K and WinXP occasionally. It
happened all the way back to Windows NT. I'm pretty sure it is in ingres
net somewhere. I've seen the problem particularly under this
circumstance:
OpenROAD sp1, OpenROAD sp2, Ingres 26sp2 net, OR patch. Then when
trying to upgrade to OpenROAD sp3 the errors display during the net
installation. Accidentally we found that pressing cancel allowed the OR
upgrade to proceed and the client seems stable.
I'm not a windows expert but I think that if the ingres service is
listed as automatic or manual the O/S loads the dlls - something about
"pre-fetch" - I'm not sure. Here's my formula for these sorts of cases:
Remove ivm from start up menu. (from all users) Stop OpenROAD appserver
and disable Stop ingres net services and set status to "disabled"
Reboot. Ensure no users log in until you are done.
Apply the patch.
If you get the error during an ingres dbms upgrade the results are bad.
Follow the steps below, then re-install everything from scratch.
By the way, I have been able to install/upgrade on a live terminal
server even when there were other sessions running. But if ivm had been
loaded at any time I think you will need to reboot first.
Paul
-----Original Message-----
From: justin.otto at orion.co.nz
Sent: Thursday, 13 October 2005 1:28 PM
To: Paul White
Subject: Re: Patch install - DLLs in use
Did you ever find the solution to this? I'm having the exact same
problem. Thanks.
Paul White wrote:
> Ingres 2.6/0305. Patch P10009. Win2000 - Terminal Server.
>
> I'm having trouble installing an ingres patch because the dlls are in
use.
> msinfo32 lists the dlls in the "Loaded Modules" section.
>
> I haven't had this problem on other machines. Normally, when I shut
> down ingres the DLLs are unloaded automatically. Is there a "autoload
> recently used DLLs" setting somewhere?
>
> The popup message says retry, skip or abort about 15 times. Examples
> are oiadfdata.dll oiadfnt.dll oiclfdata.dll ...
> slow_v4.mnx
>
> I set the Ingres Intelligent Database service to Manual, and removed
> ivm from the startup program group. Rebooted. I checked for iigcc,
> iigcn, dmfacp, dmfrcp, iidbms, rmcmd, iigwxxx, iijdbc, ivm. No other
> users are on the box. OpenROAD runtime is installed but not Appserver.
> No w4glrun processes.
>
> In the end, I renamed each dll one by one as the popup message
displayed.
> The only one I could not rename was slow_v4.mnx.
>
> Paul
> _______________________________________________
> Info-ingres mailing list
--__--__--
_______________________________________________
Info-ingres mailing list
Info-ingres@xxxxxxxxxxxxxxx
http://mailman.cariboulake.com/mailman/listinfo.py/info-ingres
End of Info-ingres Digest
This is an email from Fujitsu Australia Limited, ABN 19 001 011 427. It is confidential to the ordinary user of the email address to which it was addressed and may contain copyright and/or legally privileged information. No one else may read, print, store, copy or forward all or any of it or its attachments. If you receive this email in error, please return to sender. Thank you.
If you do not wish to receive commercial email messages from Fujitsu Australia Limited, please email unsubscribe@xxxxxxxxxxxxxx
.
- Prev by Date: Re: 6.4: IPM can not find (name)server
- Next by Date: Re: [Info-ingres] Re: 6.4: IPM can not find (name)server
- Previous by thread: [Info-ingres] FW: Patch install - DLLs in use
- Next by thread: Ingres tools
- Index(es):
Relevant Pages
|
|
