Re: Reference dimension in a sketch?

On 16 Feb, 12:24, Flynt <fl...@xxxxxxx> wrote:
Hi,

A bit tricky to explain but I'll try......!

I have inserted a new sketch in an assembly to show the path of
rotation of a part if it is rotated between two locations. The sketch
is a construction line circle, the diameter of which is mated to the
same point in each of the two modeled parts. The two modeled parts are
located in the two possible locations for the part. The centre of
rotation can be moved by dragging the size of the circle. The larger
the circle, the smaller the angle of rotation between the two
positions. At the same time the location of the centre changes,
getting either nearer or further away from the points on the parts.

Having drawn lines between the circle centre and the reference point
on each component, it is easy to measure the angle of rotation using
the measure tool.

While experimenting with an assembly and trying to achieve an optimum
location for the parts, I have to keep measuring the angle because I
need to consider it's effect on another feature. Is it possible to
insert a 'driven' dimension that changes dynamically with the dragging
of the circle but does not define the sketch? A bit like a reference
dimension in a drawing.

All a bit much for a Saturday I know but if anyone can help it would
be appreciated.

Flynt.

I didn't know that! Yup!, just found out how! It's an option in the
'more properties' box selectable at the bottom of the Dimensions tab.
You learn something every day!!

F
.

Relevant Pages

  • Reference dimension in a sketch?
    ... rotation of a part if it is rotated between two locations. ... The sketch ... rotation can be moved by dragging the size of the circle. ... it is easy to measure the angle of rotation using ...
    (comp.cad.solidworks)
  • Re: Linear pattern direction
    ... That is because only the locating dimension can cause the sketch to change ... V The V will control the diameter of the circle, ... >>> exists to define a pattern direction by some weird dimension that is ...
    (comp.cad.solidworks)
  • Re: Linear pattern direction
    ... Starting with a triangle model with a circle cut dimensioned to a point ... Doing a linear pattern off of the dimension to the point and got an ... Thanks for sharing about vary sketch. ...
    (comp.cad.solidworks)
  • Re: Dimensioning a Hexagon
    ... After dimensioning the circle, I'll make that dimension Driven and add a ... dimension across two parallel lines. ... Even auto-dimension will turn my sketch red. ... I am under the impression that every sketch should be fully defined, ...
    (comp.cad.solidworks)
  • Re: configurations - different dimensions....
    ... dimension of a circle in a sketch (I have threaded holes at on that ...
    (comp.cad.solidworks)
Loading