Re: async clk input, clock glitches

Antti wrote:

any ideas how to really clean the 4mhz clock?

I would try soldering on one of those
little schmitt trigger packs. Sometimes
a low slew rate will clock both edges
once in a while.

-- Mike Treseler


.

Relevant Pages

  • Re: Phantom drive?
    ... are broken and short circuit the Data and/or Clock line. ... So please check the 7406 inside your C64. ... But knowing you have been soldering, check with an Ohm meter if you ...
    (comp.sys.cbm)
  • Re: async clk input, clock glitches
    ... a low slew rate will clock both edges ... but i still cant understand the missing clock pulses! ... If the edge rate is within spec, adding a Schmitt trigger will have no effect. ...
    (comp.arch.fpga)
  • Re: async clk input, clock glitches
    ... little schmitt trigger packs. ... a low slew rate will clock both edges ... -- Mike Treseler ... but i still cant understand the missing clock pulses! ...
    (comp.arch.fpga)