Re: XUPV2P from digilentinc

What do I want to do with them?
Educate myself on FPGA. Hence I like to use the following:
1) Standard JTAG interfaces from Xilinx. I would like to be able to
copy
some of the existing schematics from the protoboard to my designs
and work with it from standard JTAG. For example:
- proprietary USB-JTAG interface on the nexys boards is a no no.


That's easy if you are satisfied with the standard Xilinx LPT jtag
cable.
The jtag connector is onboard. The schematic is here:
http://www.xilinx.com/support/programr/jtag_cable.pdf
The user guide is here:
http://www.xilinx.com/bvdocs/publications/ds097.pdf
Device family support and miscelanous:
http://www.xilinx.com/xlnx/xebiz/designResources/ip_product_details.jsp?key=HW-PC4

Vasile



2) A speedy memory interface.
3) A large space for multiple cores....

Essentially the board must have most of the capabilities for the
following work:

1) Plenty of i/o and adequate memory speed. example logic analyzer
2) Enough stuff for video and audio work.
3) DSP work.....

So far this is the kind of work I am aiming for on the board. So the
first project
on the board as exercise would be NTSC output :)

Regards,
John- Hide quoted text -

- Show quoted text -


.