Re: Power consumption problem

On 12 juin, 19:02, Jim Granville <no.s...@xxxxxxxxxxxxxxxxxxxxxx>
wrote:
Amine.Mi...@xxxxxxxxx wrote:
On 12 juin, 04:05, Jim Granville <no.s...@xxxxxxxxxxxxxxxxxxxxxx>
wrote:

Amine.Mi...@xxxxxxxxx wrote:

Hi,

when i implemented my architecture using ACTEL AFS600 (Fusion family)
i noticed that over 16MHz there is a gap in consumption, in fact when
i was changing my frequency from 1 kHz to 16 Mhz the power consumption
is varying from 13 mW till 20 mW when i reach 16 MHz there is a gap
and the power consumption jump directly to 30 mW,
anyone has any reason to explain this gap?

my speed grade is -2,

Is it operating normally over that threshold ?
Normally, such a current discontinuity, also infers
an operational discontinuity.

Does the slope continue at just under 0.5mW/Mhz above that threshold ?

I'd test again with some simpler code, that you know has a very high Fmax.

-jg

that's the problem: the FPGA is still working good.
Yes the slope continue at just 0.5mW/Mhz above that threshold,
i tested the FPGA with other code and what s strange is that this
discontinuity still exist but for higher frequency (again the fpga is
still working good)

Yes, that does sound strange - what was the higher freq in the other test ?
16MHz should be 'low' by FPGA standards - were you using (or had
enabled?) any of the PLL/Clock multiplier resources ?

Did you ask Actel ? - those symptoms suggest they might not
be disabling everything they should, in the SW process ?

-jg- Masquer le texte des messages précédents -

- Afficher le texte des messages précédents -

the maximum frequency is 37 MHz, and no i m not using any PLL,
I asked atcel but i m still waiting for the answer!!!

.

Relevant Pages

  • Re: Power consumption problem
    ... i was changing my frequency from 1 kHz to 16 Mhz the power consumption ... is varying from 13 mW till 20 mW when i reach 16 MHz there is a gap ... Normally, such a current discontinuity, also infers ... the FPGA is still working good. ...
    (comp.arch.fpga)
  • Re: Power consumption problem
    ... i was changing my frequency from 1 kHz to 16 Mhz the power consumption ... is varying from 13 mW till 20 mW when i reach 16 MHz there is a gap ... Normally, such a current discontinuity, also infers ... the FPGA is still working good. ...
    (comp.arch.fpga)
  • Re: Non-terminating numbers
    ... A gap to me implies a space. ... but there will be a discontinuity because the ... So I'd agree with there being no gaps in the reals, ... Doesn't calculus rely on the fact that as the limit approachs infinity a - b ...
    (sci.math)
  • Re: Power consumption problem
    ... i was changing my frequency from 1 kHz to 16 Mhz the power consumption ... is varying from 13 mW till 20 mW when i reach 16 MHz there is a gap ... an operational discontinuity. ...
    (comp.arch.fpga)
  • Power consumption problem
    ... when i implemented my architecture using ACTEL AFS600 ... i was changing my frequency from 1 kHz to 16 Mhz the power consumption ... is varying from 13 mW till 20 mW when i reach 16 MHz there is a gap ...
    (comp.arch.fpga)