Re: NGCBUILD .. MDT error on Virtex 4

Are you running this on Linux or Windows?
What is the EDK project directory? Windows sometimes doesn't like
spaces in the paths to the EDK project directory.

Paul

Cog_Rad_link wrote:

Hi,

I have been facing the following errors when I tried to generate a
bitstream for the Microblaze softcore to be ported on to Virtex 4 FPGA
board.

Running NGCBUILD ...
ERROR:MDT - microblaze_0_wrapper (microblaze_0) - xyz.mhs:46 - failed
to copy to implementation
ERROR:MDT - mb_opb_wrapper (mb_opb) - xyz.mhs:66 -failed to copy to
implementation
ERROR:MDT - debug_module_wrapper (debug_module) - xyz.mhs:74 - failed
to copy to implementation
ERROR:MDT - ilmb_wrapper (ilmb) - xyz.mhs:92 - failed to copy to
implementation
ERROR:MDT - dlmb_wrapper (dlmb) - xyz.mhs:100 -failed to copy to
implementation
ERROR:MDT - dlmb_cntlr_wrapper (dlmb_cntlr) - xyz.mhs:108 - failed to
copy to implementation
ERROR:MDT - ilmb_cntlr_wrapper (ilmb_cntlr) - xyz.mhs:117 - failed to
copy to implementation
ERROR:MDT - lmb_bram_wrapper (lmb_bram) - xyz.mhs:126 - failed to copy
to implementation
ERROR:MDT - rs232_wrapper (rs232) - xyz.mhs:133 -failed to copy to
implementation
ERROR:MDT - rs232_usb_wrapper (rs232_usb) - xyz.mhs:149 - failed to
copy to implementation
ERROR:MDT - leds_4bit_wrapper (leds_4bit) - xyz.mhs:165 - failed to
copy to implementation
ERROR:MDT - push_buttons_3bit_wrapper (push_buttons_3bit) - xyz.mhs:179
- failed to copy to implementation
ERROR:MDT - dip_switches_8bit_wrapper (dip_switches_8bit) - xyz.mhs:193
- failed to copy to implementation
ERROR:MDT - flash_ready_wrapper (flash_ready) - xyz.mhs:207 - failed to
copy to implementation
ERROR:MDT - sysace_compactflash_wrapper (sysace_compactflash) -
xyz.mhs:221 - failed to copy to implementation
ERROR:MDT - platgen failed with errors!
make: *** [implementation/microblaze_0_wrapper.ngc] Error 2
Done.

Earlier when I was using the older version, I never got these errors
and everything was working perfectly. But when the licenses got
expired, and when I installed the 7.1i versions of EDK and ISE these
errors started occuring. Can anyone please throw some light on this
issue. I have been stuck with this for the past 4 weeks and am not able
to find any resources on the internet for this. It would be great if
anyone can let me know about this.

Thanks a lot.

A.
.

Quantcast